Wolf U N F R A M E D MODEL ICBCT30IU, M O D E L I C B C T 3 0 I U, W O L F Induction Cooktops

W O L F INDUCTION  COOKTOPS

U N F R A M E D MODEL  ICBCT30IU

The illustrations below provide installation specifications for Model ICBCT30IU.

For ease of installation, 838 mm cabinets are recommended for installation of Model ICBCT30IU.

AWolf 762 mm built-in single oven may be installed below Model ICBCT30IU. For this installation, unless you are using cabinets deeper than 610 mm, it is recommended that the electrical supply be placed in the base cabinet to the right of the oven. Refer to instal- lation instructions provided with the built-in oven for additional specifications.

If Model ICBCT30IU is installed above cabinets, electrical placement is not critical. The appli- ance shall be installed in such a way to allow disconnection of the appliance from the supply mains after installation.

For Model ICBCT30IU installation options, refer to Unframed Installations on pages 14–15.

IMPORTANT NOTE: For flush mount applica- tions, it is recommended to measure the cooktop glass before cutting the countertop to ensure a proper fit. Small variances may exist between the template and the cooktop.

I N S TA L L AT I O N S P E C I F I C AT I O N S – M O D E L I C B C T 3 0 I U

					533 mm
					OVERALL
					DEPTH
			762 mm
		OVERALL WIDTH
76 mm					98 mm
		TERMINAL BOX
	Overall Dimensions
	M O D E L I C B C T 3 0 I U
	Overall Width			762 mm
	Overall Height				76 mm
	Overall Depth			533 mm

SIDE

CABINET

330 mm

max

51

mm*

762 mm min
COUNTERTOP
TO COMBUSTIBLE	457 mm min
MATERIALS

51 mm TO	SEE COUNTERTOP		51 mm TO
COMBUSTIBLE*	CUT-OUT BELOW	COMBUSTIBLE*

	114 mm
89 mm	E
914 mm	254 mm
FLOOR TO
COUNTERTOP
762 mm OVEN OPENING

Minimum Cabinet Depth 578 mm

*Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop.

NOTE: Electrical location applies only to installation with built-in oven.

Minimum Height Clearance*	98 mm
Cut-Out Width	721 mm
Cut-Out Depth	492 mm

*Minimum 165 mm clearance is required between countertop and any combustible surface directly below the cooktop.

For detailed terminal block dimensions, refer to the illustration on page 7.

COUNTERTOP

PROFILE

22

mmmax

8 mm

			765 mm
	RECESS FOR FLUSH INSTALLATION
33 mm			721 mm
RADIUS		CUT-OUT WIDTH

537 mm	11 mm RADIUS
	492 mm
RECESS	CUT-OUT
FOR FLUSH	DEPTH
INSTALLATION
	FRONT
40 mm	62 mm min

Dimensions may vary to ± 3 mm.

RECESS FOR FLUSH INSTALLATION

COUNTERTOP CUT-OUT

12