Wolf ICBCT30I D E L I C B C T 3 6 I U, Minimum Height Clearance 98 mm, Cut-Out Depth 492 mm

INSTALLATION I N S T R U C T I O N S

U N F R A M E D MODEL  ICBCT36IU

The illustrations below provide installation specifications for Model ICBCT36IU.

For ease of installation, 991 mm cabinets are recommended for installation of Model ICBCT36IU.

AWolf 914 mm built-in single oven may be installed below Model ICBCT36IU. For this installation, unless you are using cabinets deeper than 610 mm, it is recommended that the electrical supply be placed in the base cabinet to the right of the oven. Refer to instal- lation instructions provided with the built-in oven for additional specifications.

If Model ICBCT36IU is installed above cabinets, electrical placement is not critical. The appli- ance shall be installed in such a way to allow disconnection of the appliance from the supply mains after installation.

For Model ICBCT36IU installation options, refer to Unframed Installations on pages 14–15.

IMPORTANT NOTE: For flush mount applica- tions, it is recommended to measure the cooktop glass before cutting the countertop to ensure a proper fit. Small variances may exist between the template and the cooktop.

I N S TA L L AT I O N S P E C I F I C AT I O N S – M O D E L I C B C T 3 6 I U

	533 mm
	OVERALL
	DEPTH
		SIDE
914 mm		CABINET
				762 mm min
OVERALL WIDTH		330 mm
				COUNTERTOP
		max	TO COMBUSTIBLE
					457 mm min
				MATERIALS
76 mm	98 mm		51 mm TO	SEE COUNTERTOP		51 mm TO
		51	COMBUSTIBLE*	CUT-OUT BELOW		COMBUSTIBLE*
TERMINAL BOX		mm*
						114 mm
Overall Dimensions				89 mm		E
			914 mm			254 mm
			FLOOR TO
			COUNTERTOP
M O D E L I C B C T 3 6 I U				914 mm OVEN OPENING
Overall Width	914 mm
Overall Height	76 mm
Overall Depth	533 mm
Minimum Cabinet Depth	578 mm	*Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop.
		NOTE: Electrical location applies only to installation with built-in oven.
Minimum Height Clearance*	98 mm			918 mm
				RECESS FOR FLUSH INSTALLATION
Cut-Out Width	873 mm		33 mm	873 mm
			RADIUS	CUT-OUT WIDTH
Cut-Out Depth	492 mm	COUNTERTOP
		PROFILE
*Minimum 165 mm clearance is required		22	537 mm	11 mm RADIUS		492 mm
between countertop and any combustible		mm max
			RECESS			CUT-OUT
surface directly below the cooktop.			FOR FLUSH			DEPTH
			INSTALLATION
For detailed terminal block dimensions,			8 mm	FRONT
refer to the illustration on page 7.			40 mm			62 mm min

Dimensions may vary to ± 3 mm.

RECESS FOR FLUSH INSTALLATION

COUNTERTOP CUT-OUT

13