JVC DR-DX5SE 8L-1INPUT ^ VIDEO / S-VIDEO VIDEO:, VIDEO:, 8L-1OUTPUT ^ SCART VIDEO / SCART S-VIDEO / SCART RGB / COMPONENT, SCART VIDEO:, SCART RGB:, COMPONENT:, S-VIDEO:

				EDITING EN 63
	Output/Input Set			SCART RGB:
				If a connected appliance’s input is compatible with RGB signals,
				set to ASCART RGBB. You can obtain a high-quality RGB
				picture.
● Turn on the TV and select the AV mode.				COMPONENT:
● Slide the TV/CABLE/SAT/DVD switch to DVD.
				If a connected appliance’s input is compatible with Y/PB/PR
		CABLE/SAT		signals, set to ACOMPONENTB. You can obtain a high-quality
				Y/PB/PR picture. Switch the TV to the input that you can watch
		TV	DVD
				component video pictures.

ENTER

Selection Keys

FGDE

SET UP

8L-1 INPUT ^ VIDEO / S-VIDEOVIDEO:

If a connected appliance’s output is compatible only with regular video signals, set to AVIDEOB.

S-VIDEO:

If a connected appliance’s output is compatible with Y/C signals, set to AS-VIDEOB. You can obtain a high-quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

NOTES:

●If AL-1 OUTPUTB is set to ASCART S-VIDEOBor ASCART RGBB, it is not possible to set AL-1 INPUTB to AS-VIDEOB.

●If AL-2 SELECTB is set to ASAT S-VIDEOBor ADECODERB, it is not possible to set AL-1 INPUTB to AS-VIDEOB.

●If AL-2 SELECTB is set to ADECODERB, it is only possible to set AL-1 OUTPUTB to ASCART VIDEOB.

●Component video signals are not output from the [L-1 IN/OUT] connector.

●When Progressive scan mode is engaged, it is not possible to select the setting of AL-1 OUTPUTB. (A pg. 63)

L-1 Output And L-1 Input Setting

The [L-1 IN/OUT] connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set AL-1 OUTPUTB and AL-1 INPUTB to the appropriate mode depending on the type of appliance connected to the unit’s [L-1 IN/ OUT] connector.

1Press SET UP to access the Main Menu screen.

2Press selection keys to select AFUNCTION SET UPB, then press G.

L-2 Select Setting

Set AL-2 SELECTB to the appropriate mode depending on the type of appliance connected to the unit’s [L-2 IN/DECODER] connector.

1Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB on the left column.

2Press selection keys to select AL-2 SELECTB, then press

ENTER.

3Press selection keys to select

the appropriate setting, then	DVD VIDEO SET UP	HDD/DVD/DV SET UP	FUNCTION SET UP		INITIAL SET UP
	REC/PLAY SET UP	DISPLAY SET	VIDEO IN/OUT
press ENTER.	MONITOR TYPE
				4:3LB

3Press selection keys to select AVIDEO IN/OUTB, then press

G.

4Press selection keys to select AL-1 OUTPUTB or AL-1 INPUTB, then press ENTER.

5Press selection keys to select the appropriate setting, then press ENTER.

6Press SET UP to complete the setting.

DVD VIDEO SET UP				HDD/DVD/DV SET UP		FUNCTION SET UP		INITIAL SET UP
	REC/PLAY SET UP			DISPLAY SET		VIDEO IN/OUT
		MONITOR TYPE					4:3LB
		F-1 INPUT
							VIDEO
		L-1 OUTPUT
							SCART VIDEO
		L-1 INPUT					VIDEO
		L-2 SELECT					VIDEO
	SET UP		ENTER		SELECT WITH @ THEN PRESS [ENTER]
	EXIT		SELECT		PRESS [SET UP] TO EXIT
DVD VIDEO SET UP				HDD/DVD/DV SET UP		FUNCTION SET UP		INITIAL SET UP
	REC/PLAY SET UP			DISPLAY SET		VIDEO IN/OUT
		MONITOR TYPE					4:3LB
		F-1 INPUT
							VIDEO
							SCARTSCARTVIDEOVIDEO
		L-1 OUTPUT
		L-1 INPUT					SCART S-VIDEO
							VIDEO
							SCART RGB
		L-2 SELECT					COMPONENT
							VIDEO
	SET UP		ENTER		SELECT WITH @ THEN PRESS [ENTER]
	EXIT		SELECT		PRESS [SET UP] TO EXIT

4 Press SET UP to complete the	F-1 INPUT		VIDEO
	L-1 OUTPUT		VIDEO
setting.
	L-1 INPUT		SCART VIDEOVIDEO
			S-VIDEO
	L-2 SELECT		VIDEOSAT VIDEO
			DECODER
	SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
	EXIT	SELECT	PRESS [SET UP] TO EXIT

* The boldface settings below indicate the settings at your purchase.

8L-2 SELECT ^ VIDEO / S-VIDEO /SAT VIDEO / SAT S-VIDEO /

DECODER

Select AVIDEOB or AS-VIDEOBto use this unit as the recording deck with the player connected to the [L-2 IN/DECODER] connector, or to use the satellite receiver connected to the [L-2 IN/ DECODER] connector.

VIDEO:

If a connected appliance’s output is compatible only with regular video signals, set to AVIDEOB.

* The boldface settings below indicate the settings at your purchase.

8L-1 OUTPUT ^ SCART VIDEO / SCART S-VIDEO /SCART RGB / COMPONENT

SCART VIDEO:

If a connected appliance’s input is compatible only with regular video signals, set to ASCART VIDEOB.

SCART S-VIDEO:

If a connected appliance’s input is compatible with Y/C signals, set to ASCART S-VIDEOB. You can obtain high-quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

S-VIDEO:

If a connected appliance’s output is compatible with Y/C signals, set to AS-VIDEOB. You can obtain high-quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

Select ASAT VIDEOB or ASAT S-VIDEOBto view a satellite programme with the TV set while the unit is turned off. (A pg. 69)

SAT VIDEO:

If a connected satellite receiver’s output is compatible only with regular video signals, set to ASAT VIDEOB.