JVC DR-MV4SUJ Manual Timer Programing, Weekly/Daily Recording, TIMER RECORDING EN, date, Program Check screen, select “VHS NEW TIMER, C Select “L-1”in step, ENTER, TIMER

TIMER RECORDING EN 31

Manual Timer Programing		1 Press DVD or VHS to select the deck on which you want to
		perform timer programing.
		2 For DVD deck
		Load a recordable disc.
		For VHS deck
You can program each deck to timer-record as many as		Load a cassette with safety tab intact.
8 programs up to 30 days ahead.		3 Press PROG to access the	VHS PRGM CHECK		DVD PRGM CHECK
● Make sure that the unit’s built-in clock is set properly.		Program Check screen.	DATE	START		STOP		CH	DAILY/WEEKLY REC MODE
		● When “PROGRAM FULL	10/07 THU	10:00PM - 10:30PM				10	WEEKLY	XP
			05/07 SAT	7:00PM - 8:00PM				44		SP
● Turn on the unit.		DELETE UNWANTED TIMER	11/07 FRI	08:00AM - 09:00AM				26		LP
			11/07 FRI	08:30AM - 09:30AM				33		LP
● Turn on the TV and select the AV mode.		PROGRAM” appears on the TV	++++++++++++++++DVD NEW TIMER PROGRAM ++++++++++++++++
		screen, you need to cancel some
		of the reserved programs.	EXIT		DISC TIMER PRGM
		( pg. 34)			OK		SELECT WITH [CURSORS]
			PROG		SELECT		THEN PRESS [ENTER]
		4 For DVD deck
		Press rt w e to select “DVD PRGM CHECK” and press rt to
VHS	DVD	select “DVD NEW TIMER PROGRAM”, then press ENTER.
		For VHS deck
		Press rt w e to select “VHS	TIMER PROGRAM
		PRGM CHECK” and press rt to
		select “VHS NEW TIMER	DATE		START			STOP		CH
		PROGRAM”, then press ENTER.	10/07 THU		- - : - -			- - : - -		- -
		5 Press rt to set the desired	DAILY/WEEKLY		REC MODE					NAME
		date.				SP

PROG

TIMER

● The current date appears on the	EXIT	CONFIRM SET TIMER PROGRAMING WITH [CURSORS]
TV screen. The date you enter	PROG	SELECT THEN PRESS [ENTER]

ENTER

Cable Box and DBS Receiver Users (DVD Deck Only)To timer-record a satellite broadcast using Manual Timer Programing:APerform “Manual Timer Programing”.

BSet the cable box or DBS receiver to the appropriate channel before the selected program begins.

C Select “L-1” in step 8.D Leave the cable box or DBS receiver’s power on.

NOTES:

●When two successive programs are recorded on a DVD-RW disc with Manual Timer Programing function, the beginning of the second one may be left off the recording.

●If the copy limited program is received during timer-recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programed.

●In case of a power failure after programing, the unit’s memory backup keeps your selections for approximately 5 seconds.

●Programs that start after midnight must have the next day’s date.

●To record the programs received by cable box or DBS receiver, record on the DVD discs. For details, refer to “Cable Box and DBS Receiver Users (DVD Deck Only)” above.

appears in its place.

6 Press w e to select “START”, then press rt to set the desired start time.

●Each press of rt advances/goes back the start time in 1-min. increments.

●To advance/go back the start time in 30-min. increments, press and hold rt.

7 Press w e to select “STOP”, then press rt to set the desired stop time.

●Each press of rt advances/goes back the stop time in 1-min. increments.

●To advance/go back the stop time in 30-min. increments, press and hold rt.

8 Press w e to select “CH”, then press rt to select the desired channel.

9 Press w e to select the desired recording option as required. Press rt to select the desired setting, then press ENTER.

●“STOP” (To advance/go back the stop time by 30 minutes, press and hold rt).

●“DAILY/WEEKLY” ( below “Weekly/Daily Recording”)

●“REC MODE” ( pg. 29, 30, “Recording Mode”)

●“NAME” ( pg. 62, “Modify Title Name”) (DVD deck only)

10 Press ENTER to access the Program Confirmation screen.11 Press ENTER to complete timer programing.

●To program another timer, repeat steps 3 – 11.

●If “PROGRAM OVERLAPPED” appears on the TV screen, see page 34.

12 Press TIMER # to engage the unit’s timer mode. The DVD timer lamp lights up on the unit and the unit is automatically turned off.

●To disengage the timer mode, press TIMER # again.

Weekly/Daily Recording

You can record programs with one of the following weekly/daily timer settings.WEEKLY: Select to record a weekly program.MON–FRI: Select to record a daily program from Monday through Friday.MON–SAT: Select to record a daily program from Monday through Saturday.SUN–SAT: Select to record a daily program from Sunday through Saturday.