TIMER RECORDING EN 35

 

 

Automatic Satellite Program Recording

 

 

 

 

 

VIDEO/AUDIO INPUT L-1] connectors.

 

 

 

 

● Make sure the DBS receiver is connected to the unit’s [S VIDEO/

 

 

(DVD Deck Only)

 

● Program the timer on the DBS receiver.

 

 

 

 

 

 

 

 

1 Load a recordable disc.

 

 

 

 

 

 

 

This function allows you to automatically record a satellite program

 

2 Press DVD so that the DVD lamp lights up on the unit.

which is timer-programed on your external DBS receiver. Connect

 

3 Press REC MODE repeatedly to set the recording mode.
a DBS receiver to the unit’s [S VIDEO/VIDEO/AUDIO INPUT L-1]

 

 

4 Set “REAR AUX L-1” to “VIDEO” for the VIDEO input connector,

connectors and program the timer on the DBS receiver. The unit

 

starts or stops recording by the signals input from the DBS

 

or “S-VIDEO” for the S-VIDEO input connector, depending on the

receiver. After recording, the unit’s power shuts off automatically.

 

connector being used. ( pg. 71)

● You can also connect the cable box if it has a timer.

 

5 Press and hold REC LINK for about 2 seconds to engage the

 

 

 

 

Automatic Satellite Program Recording mode. “R-LK” appears on

ATTENTION:

 

the front display panel.

● Be sure not to turn on the DBS receiver before the program is

 

NOTES:

 

 

executed; otherwise, the unit will start recording when the DBS

 

 

 

 

● To disengage the Automatic Satellite Program Recording mode,

 

 

receiver’s power is turned on.

 

 

 

 

press REC LINK.

● If you have connected another appliance other than a DBS

 

 

● If the unit’s power is off, it is not possible to engage the Automatic

 

 

receiver to the [S VIDEO/VIDEO/AUDIO INPUT L-1] connectors,

 

 

 

 

Satellite Program Recording mode.

 

 

be sure not to engage the Automatic Satellite Program Recording

 

 

 

 

● In step 5, if “R-LK” blinks quickly on the front display panel even

 

 

mode; otherwise, the unit will start recording when the connected

 

 

 

 

though your DBS receiver’s power is off, Automatic Satellite Program

 

 

appliance’s power is turned on.

 

 

 

 

Recording will not work properly with that DBS receiver*. If this is the

● Automatic Satellite Program Recording and timer-recording cannot

 

 

case, perform “Manual Timer Programing” ( pg. 31) to timer-record

 

 

be done at the same time.

 

 

 

 

a satellite program.

 

 

 

 

 

 

 

 

 

 

 

* Some DBS receivers output signals even if the power is off. Automatic

 

 

 

 

Satellite Program Recording is not possible with those DBS receivers.

DVD

REC LINK

●“R-LK” blinks on the front display panel while Automatic Satellite Program Recording is in progress.

●For timer programing of the DBS receiver, refer to the instruction manual of the DBS receiver.

●Automatic Satellite Program Recording is not possible if your DBS receiver does not have a timer.

●Pressing the unit’s 1 button while Automatic Satellite Program Recording is in progress turns off the unit’s power and disengages the Automatic Satellite Program Recording mode.

●If there are more than one satellite programs you wish to record with Automatic Satellite Program Recording, it is not possible to set different recording modes for each program.

●Depending on the type of DBS receiver, the unit may not record a slight portion of the beginning of the program or may record slightly longer than the actual length of the program.

●If you engage the Automatic Satellite Program Recording mode when the DBS receiver’s power is on, the unit will not start Automatic Satellite Program Recording even though “R-LK” blinks on the front display panel. When the DBS receiver shuts off once and is turned back on again, the unit starts recording.

●You can also record a program from your cable system in the same way if the system has a timer.

REC MODE