JVC DR-MV4SUJ Marking Positions To Play Back Again Later, Angle Selection, Subtitle Selection, Checking The Time Information, your desired angle, While paused, press, MENU

ADVANCED PLAYBACK EN 45

Marking Positions To Play Back Again Later	8 Video CD/Audio CD
	During playback
	Current track elapsed time ]Current track remaining time ]Total
	elapsed time ] Total remaining time ] (back to the beginning)

It is possible to mark positions (up to 999 points) where you want to play back once again later, and start playback from a marked position. Marking onto DVD-RAM/RW (VR mode only) discs when recording is helpful to locate a start point when you play back the discs later.

To mark positions:During playback, press MARK at positions you want to mark.

●“MARK” appears on the TV screen. You can easily locate the marked positions using 2or 6when you play back the disc.

To delete the marked positions: While paused, press 2 or 6 to locate a marked position you want to delete, then press MARK.

●Crossed “MARK” appears on the TV screen, and the marked position is deleted.

NOTES:

●When a monaural program changes to a stereo program while recording, a mark signal is automatically recorded.

●Titles will be divided into “chapters” at the marked points according to the disc types as follows:

DVD-R/RW (Video mode): After finalizing, titles are divided into “chapters” at the marked points that are marked automatically approximately every 5 minutes during recording before finalizing. ( pg. 75)

DVD-RW (VR mode): After finalizing, titles are divided into “chapters” at the marked points that are marked at the desired locations during playback before finalizing. ( pg. 75)

DVD-RAM: Titles are divided into “chapters” at the marked points that are marked at the desired locations during playback.

DVD VIDEO and finalized disc: Creating of marked points are not permitted.

In stop mode

0:00 ]Playback time of track 1 ]0:00 ]Total length of a disc ] (back to the beginning)

NOTE:

When a PBC-compatible Video CD disc is loaded, deactivate the PBC function. ( pg. 46)

Angle Selection

You can enjoy a variety of scene angles if a DVD VIDEO disc contains “multi-angle” parts, where the same scene was shot from different angles.

If the disc contains “multi-angle” parts, “” appears on the TV screen at the beginning of the “multi-angle” part.

1Press ANGLE during playback.

The angle selection display
appears on the TV screen.	When 3 scene angles are
2 Press ANGLE or w e to select contained.
your desired angle.

●Each time you press ANGLE or w e, the angle changes.

●When “X” appears on the TV screen, the current scene is not recorded from multiple angles. In addition, some discs prohibit angle selection.

●To clear the angle selection display, press ENTER. In addition, the angle selection display disappears automatically if no operation is done for 10 seconds.

Subtitle Selection

Checking The Time Information

You can check time information of a disc on the front display panel and the TV screen.

Each press of DISPLAY changes the display as follows:8DVD-RAM/DVD-R/DVD-RW During recording

Clock time (front display panel only) ] Current title elapsed time ] Disc remaining time* ] (back to the beginning)

* only discs before finalizing

● Clock time is displayed only when a recordable disc is recorded.

During playback

Each title elapsed time ] Current title elapsed time ] Disc remaining time* ] (back to the beginning)

* only discs before finalizing

In stop mode or during playback

Some DVD VIDEO discs contain more than one subtitle language, from among which you can choose the desired subtitle language. “” appears on the TV screen at the beginning of the part where more than one subtitle language are recorded.

1 Press SUBTITLE during
playback. The subtitle selection	ENGLISH
display appears on the TV screen.	When 3 subtitle languages are
● Each time you press SUBTITLE,
	contained.
the subtitle display is switched on
and off.

2 Press w e to select your desired language.

●To clear the subtitle selection display, press ENTER.

NOTES:

●When “X” appears on the TV screen, no subtitle language is recorded.

●When the subtitle language won’t be changed with the procedure above, change the subtitle on a disc menu displayed by pressing MENU.

●It is possible to check disc remaining time according to recording modes also by pressing REMAIN.

●In FR mode, it is possible to set recording time in detail. While the recording mode and the disc remaining time are displayed by pressing REMAIN, press rt to select “FR”, then press w e to select the desired recording time. ( pg. 58)

●It is not possible to switch the recording mode during playback or while recording.