JVC DR-MV4SUJ Repeat Playback, Manual Tracking, Next Function Memory, VHS Progressive Scan, 56 EN ADVANCED PLAYBACK, MIX, NORM, back, back, played back, played back, DVD

56 EN ADVANCED PLAYBACK

Next Function Memory Soundtrack Selection

The Next Function Memory “tells” the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode.

For Automatic Start Of PlaybackPress 3, then press 4 within 2 seconds.

●Outside ring of disc marks blinks on the front display panel.

For Automatic Cassette EjectionPress 3, then press x (EJECT) within 2 seconds.

●“” blinks on the front display panel.

Your unit is capable of recording three soundtracks (L, R and NORM) and will play back the one you select.

During PlaybackPressing AUDIO changes the soundtrack as follows:

VHS

Repeat Playback

Your unit can automatically play back the whole tape 100 times repeatedly.1 Press 4 to start playback.2 Press and hold 4 for over 5 seconds, then release.

●“ ” lights up on the front display panel.

●After playing back a tape 100 times, the unit stops automatically.

3 Press 8 at any time to stop Repeat Playback.

●Pressing 4, 3, 5 or 9 also stops Repeat Playback.

Manual Tracking

Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the CH buttons.

1 During playback, press CH + or – on the unit simultaneously to activate manual tracking.

TRACK	USE
Front Display Panel
LR	Hi-Fi sound is played back
L	Sound on the left Hi-Fi channel is
	played back
R	Sound on the right Hi-Fi channel is
	played back
NORM	Sound on the normal track is played
	back
	Both sounds on the Hi-Fi track and
MIX	normal track are mixed and played
	back

NOTE:

“LR” should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

VHS Progressive Scan

You can watch the images on VHS deck in the Progressive scan mode via component video.

2 Press CH + or – to adjust the tracking manually.

●To return to automatic tracking, press CH + or – simultaneously or eject and insert the tape again.

NOTE:

When a new tape is inserted, the unit enters the automatic tracking mode automatically.

ATTENTION:

●Your TV needs to be compatible with Progressive and to have Component video input connectors.

●Make sure that there is no disc in the unit.

1 Set the Progressive-compatible TV to the component input mode.

2 Press DVD so that the DVD lamp lights up on the unit.

3 Press PROGRESSIVE SCAN for 3 or more seconds.

●The video output indicator lights up on the front display panel.

4 Press VHS so that the VHS lamp lights up on the unit, then press PROGRESSIVE SCAN.

●“]” lights up on the unit.

NOTES:

●Be sure to engage the DVD deck in stop mode.

●During still picture in VHS Progressive Scan mode, the images may jitter, but this is not a malfunction.