JVC DR-MV4SUJ Disc Dubbing (From DVD To VHS), Dubbing An Entire Disc, VHS, DVD, }DVD, SCAN, REC MODE, PROGRESSIVE, 38 EN EDITING, VHS/DVD DUBBING, dubbing, other equipment

38 EN EDITING

Disc Dubbing (From DVD To VHS)				1 For DVD deck
				Load a disc you want to dub.
Dubbing An Entire Disc				For VHS deck
				Load a cassette with the record safety tab intact.
You can easily use this unit for dubbing without connecting any				2 Press VHS/DVD on the unit repeatedly or VHS on the remote
other equipment.				control so that the VHS lamp lights up on the unit.
				3 Press REC MODE repeatedly to set the recording mode.
● Turn on the unit.				4 Press }DVD to select the dubbing direction.
● Turn on the TV and select the AV mode.
				● “}” lights up on the unit.
● Make sure that both the DVD deck and the VHS deck are in the
				5 Press and hold DUBBING for more than 2 seconds to start the
stop mode.
● Set “SUPERIMPOSE” to “OFF”. ( pg. 71)				dubbing.
				● If the tape has not been rewound, the VHS deck rewinds the tape
		}DVD		automatically. When the VHS deck has finished rewinding, dubbing
				begins automatically.
				● After dubbing is completed, the VHS deck rewinds the tape
				automatically and the unit shuts off.
				● To stop dubbing, press 8.
STANDBY/ON	VHS	DVD	REC	NOTES:
		VHS DUBBING DVD	CH
		VHS/DVD ONE-TOUCH EXPERT DUB
S-VIDEOVIDEO	AUDIO
DVD	F－1			● When you turn on the unit next time, press }DVD so that “}” lights
	(MONO)
				off before performing any operations. If it is not done, recording on
				the VHS deck is not possible.
		VHS/DVD DUBBING		● It is not possible to start dubbing if the unit retains a memory of the
				resume points. Press 8 twice to clear the resume points.
				● There may be a discrepancy of several seconds between where you
				intend dubbing to start, and where it actually stars.
				● The superimposed indication during the operation or dubbing is not
				recorded.
	VHS			● When the end of the tape is reached during dubbing, the tape is
		DVD		ejected and both deck stops.
				● When the progressive mode is set, “}” does not light up on the unit.
				Press PROGRESSIVE SCAN so that video output indicator ( )
				lights off on the front display panel.
				● It may be impossible to dub a DVD-R or DVD-RW (Video mode) disc
				recorded on the devices from other manufacturers or on a PC. In
				such case, perform “Manual Dubbing (From DVD To VHS)”
				( pg. 39).
				● It is not possible to perform other operations like Live Memory
				Playback. Check the recorded program on the disc after dubbing.
				● If “]” lights up on the unit and you play back a DVD VIDEO disc, the
				images dubbed to the VHS deck may not be output to the TV
				properly.

REC MODE

PROGRESSIVESCAN