EDITING EN 41

Edit From Another Recorder

1 Make connections.

A When recording on DVD deck
You can use your unit as the source player or as the recording

1.If another recorder has no S-VIDEO connector, connect the unit’s

[AUDIO/VIDEO INPUT] connectors to the audio/video output

deck.

connectors on another recorder.

NOTE:

2.If another recorder has S-VIDEO connector, connect the [AUDIO

INPUT] and [S-VIDEO INPUT] connectors to the audio and S-video

When using another recorder as the recording deck, refer to its

output connectors on another recorder.

instruction manual.

● If connecting a unit with an S-VIDEO connector, it is recommended to

 

A When recording on DVD deck

use an optional S-Video cable to minimize picture degradation while

 

editing.

 

B When recording on VHS deck

 

1.Connect the unit’s [AUDIO/VIDEO INPUT] connectors to the audio/

Your unit

video output connectors on another recorder.

2 Press VHS/DVD on the unit repeatedly to select the recording

 

 

deck.

3 Press CH +/– to select “L-1” when using this unit as the recording deck.

Recorder

For DVD deck

TV receiver

● Set “REAR AUX L-1” to “VIDEO” for the VIDEO input connector, or

 

“S-VIDEO” for the S-VIDEO input connector, depending on the

 

connector being used. ( pg. 71)

 

4 Press REC MODE repeatedly to set the recording mode.

 

5 Engage the Play mode of the source player.

 

6 Engage the Record mode of the recording deck.

 

7 Stop recording on the recording deck, then stop playback on the

 

source player.

 

NOTES:

Another recorder

● All necessary cables can be obtained from your dealer.

● When you use this unit as the source player for editing, be sure to set

 

“SUPERIMPOSE” to “OFF” before starting. ( pg. 71)

Player

● It is also possible to use the audio/video input connectors on the front

panel. In that case, select “F-1” in step 3.

BWhen recording on VHS deck

Your unit

Recorder

TV receiver

Another recorder

Player