JVC DR-MV4SUJ Advanced Recording (VHS), Free Rate Function, 58 EN ADVANCED RECORDING, minutes), to the whole disc space, selection procedure. ( pg. 28, 31), disc space

58 EN ADVANCED RECORDING
Free Rate Function		Advanced Recording (VHS)
To record the entire program, the unit automatically sets the
appropriate recording mode depending on the combination of the
total time of the program to be recorded and either the remaining		● Turn on the unit.
disc space or the specified recording time (from 60 minutes to 480		● Turn on the TV and select the AV mode.
minutes).		● Press VHS so that the VHS lamp lights up on the unit.
8 To record the entire program within the actual remaining
disc space
Select “FR (JUST)” in a recording mode selection procedure.
● Note that this function is available only for timer programing recording
( pg. 31).
8 To record the entire program by specifying the desired		STANDBY/ON	VHS	DVD	REC
					CH
recording time				VHS/DVD ONE-TOUCH EXPERT DUB
		S-VIDEO	VIDEO AUDIO
				VHS DUBBING	DVD
		DVD	F－1
Select “FR60–FR360”, “FR420” or “FR480” in a recording mode			(MONO)
selection procedure. ( pg. 28, 31)
8 To record a 25-min. long daily program five times just on
the same DVD disc for example
Perform “Manual Timer Programing” ( pg. 31) procedure. Be
sure to set the recording mode to “FR125” and set Weekly/Daily
Rec Function to “MON–FRI” in step 9 to fit the total recording time			VHS
to the whole disc space.				TV INPUT
	A: 1st
Blank	B: 2nd
	C: 3rd
	D: 4th
	E: 5th			CH +/–
			C.RESET
When the same program is recorded in SP mode instead of in
“FR125”, the 5th program cannot be recorded.
	A: 1st
Blank	B: 2nd
	C: 3rd
	D: 4th
	E: Blank (20 min.)

NOTES:

●You can program this unit to timer-record, regardless of the disc

remaining time. When the disc remaining time is not enough,	DISPLAY
recording may stop in the middle of a program. To avoid this, make
sure of the disc remaining time before setting timer programing.
(Example) If you programed to timer-record for 60 minutes in SP
mode on a 120-minute disc, the disc remaining time would be 30
minutes in XP mode, 60 minutes in SP mode, 120 minutes in LP
mode, 180 minutes in EP mode, and 240 minutes in FR480 mode.
Timer-recording will not complete beyond these remaining times.
● The maximum recording time of “FR (JUST)”mode is the same as the
recording time of FR480 mode. When timer programing a long
program in “FR (JUST)”mode on a disc whose remaining time is
short, it is recommended to check the disc remaining time in FR480
mode to see if the remaining time is enough for the program.

●Even if more than one program are timer programed in “FR (JUST)” mode, only the first one is recorded.

●In order to ensure that the recording fits on the disc, this feature may leave a slight non-recorded section at the end of the disc.

●There may be some noise and sound disturbance at the point on the disc where the unit switches the mode.