JVC DT-V17L2D manual Specifications, General, Input/output terminals

Specifications

7 General

Model name	DT-V17L2D
Type	Multi format LCD monitor
Screen size	Type 17 wide format
Aspect ratio	16:10
LCD panel	17˝ wide, active matrix TFT
Effective screen size	Width: 367.2 mm
	Height: 229.5 mm
Number of pixels displayed	1 440 x 900
Number of colors displayed	16.77 million
Viewing angle (TYP.)	160° (Horizontally), 140° (Vertically)
Panel brightness (at least)	400 cd/m2
(TYP.)
Contrast ratio (TYP.)	600:1
Horizontal/vertical frequency	H: 31.469 kHz – 75.000 kHz
(computer signal)	V: 60 Hz ± 5 Hz
	* Some signals within this frequency range may not be displayed (“Out of
	range” is displayed).
Compliant video signal format	☞ “Available signals” on page 9
Format	HD SDI: BTA S-004B, SMPTE292M
	SD SDI:	ITU-R BT.656: 525/625
		SMPTE259M: 525
	EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Audio output	Internal speaker: 1.0 W + 1.0 W
Operating conditions	Operating temperature: 0°C – 40°C
	Operating humidity: 20% – 80% (non-condensing)
	* Slightly variable depending on ambient conditions for installation.
Power requirements	AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz
	DC 12 – 17 V
Rated current	0.56 A (AC 120 V)/0.36 A (AC 220 – 240 V)
	3.0 A (DC 12 – 17 V)
External dimensions	Width:	395 mm (with the stand), 395 mm (without the stand)
(excluding protruding parts)	Height:	344.6 mm (with the stand), 304 mm (without the stand)
	Depth:	243 mm (with the stand), 86 mm (without the stand)
Weight	8.1 kg (with the stand)
	5.2 kg (without the stand)
Accessories	AC power cord x 2, Power cord holder x 1, Screw x 2 (for power cord holder),
	Ferrite core x 1 (for external battery)

Use the Anton Bauer Dionic 90 (mount: QR DXC-M3A) external battery.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Notice on transportation

This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.

7Input/output terminals

	VIDEO	Input/output of composite signal:
		1 line, BNC connector x 2, 1 V(p-p), 75 Ω
		* The input (IN) and output (OUT) terminals are bridge-
		connected (auto termination).
	DVI-D (HDCP)	DVI-D signal input (compatible with HDCP):
		DVI-D connector x 1 (compatible with DDC2B)
Video	COMPO. (Y, PB/B-Y, PR/R-Y)	Input/output of analog component signal:
		1 line, BNC connector x 6
		Y: 1 V(p-p), 75 Ω
		PB/B-Y, PR/R-Y: 0.7 V(p-p), 75 Ω
		* The input (IN) and output (OUT) terminals are bridge-
		connected (auto termination).
	E. AUDIO HD/SD SDI (IN 1)	Digital signal input (compatible with EMBEDDED AUDIO signals):
	E. AUDIO HD/SD SDI (IN 2)	auto detection, 1 line, BNC connector x 1
	E. AUDIO HD/SD SDI	Digital signal output (compatible with EMBEDDED AUDIO signals):
	(SWITCHED OUT)	1 line switched out, BNC connector x 1
Audio	AUDIO (IN)	Analog audio signal input:	1 line, RCA connector x 2,
			500 mV (rms), high impedance
	AUDIO (MONITOR OUT)	Analog audio signal output:	1 line, RCA connector x 2,
			500 mV (rms)
External control	REMOTE (MAKE/TRIGGER)	☞ “Using the MAKE/TRIGGER system” on page 14
	REMOTE (RS-485)	☞ “Using the serial communication” on page 15
	REMOTE (RS-232C)

•For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different from actual products.

•Design and specifications are subject to change without notice.

•All company names and product names mentioned herein are used for identification purposes only, and may be the trademarks or registered trademarks of their respective companies.

ENGLISH17