Menu Configuration—MAIN MENU (cont.)

For the operation procedure, see page 7.

Adjustment bar

Displayed when selecting

Operation guide“BALANCE.” Shows the buttons for each

operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Settings of “E.AUDIO GROUP”

The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows.

(G means GROUP)

1G: channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)

2G: channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)

1-2G:channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G)

3G: channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)

1-3G:channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/1 – 4 (1G)/5 – 8 (2G)/ 9 – 12 (3G)/1 – 8 (1G+2G)/1 – 12 (1-3G)

Example of the level meter display—Level meter position and audio channels

Ex.: When “LEVEL METER ch” is set to “LINE” and “BAR TYPE” is set to “3COLORS”

OVER LEVEL REFERENCE LEVEL

Red

Yellow

Green

•The level meter with no audio signal input is displayed in white for “3COLORS”, and in gray for “W.100.”

•You can select the position of the level meter display—top or bottom of the screen (☞ “POSITION” in “INFORMATION” on page 19).

•When “PEAK HOLD” is set to “ON,” the maximum level meter value will remain displayed for a set period of time. (At the time the signal input level reaches the highest value.)

 

 

 

 

14

AUDIO SETTING

 

 

 

Settings for the audio output balance, EMBEDDED AUDIO signals and level meter

 

 

 

 

 

Item

To do

Setting value

BALANCE

Adjust the balance between the right and left speakers.

L5 – L1, 0, R1 – R5

AUDIO1 ASSIGN.

Select the video input which the audio signal through

SDI-1, SDI-2, DVI, COMP/

 

 

 

AUDIO ASSIGN (IN 1) terminal is assigned to.

RGB, VIDEO-1, VIDEO-2

AUDIO2 ASSIGN.

Select the video input which the audio signal through

 

 

 

 

AUDIO ASSIGN (IN 2) terminal is assigned to.

 

E.AUDIO GROUP*1

Select the audio channel group of the EMBEDDED AUDIO

☞ “NOTE”

 

 

 

signals.

 

LEVEL METER

Adjust the level meter display for the EMBEDDED AUDIO

☞ “NOTE”

SETTING*1

signals.

 

 

LEVEL METER ch

Select how the audio channels are displayed on the level

OFF, LINE (Displays

 

 

 

meter.

the channels 1 – 6 at

 

 

 

 

the left of the screen

 

 

 

 

and 7 – 12 at the right.),

 

 

 

 

DIVIDE (Displays the odd

 

 

 

 

channels at the left of

 

 

 

 

the screen and the even

 

 

 

 

channels at the right.)

 

BAR TYPE

Select the color of the level meter display.

3COLORS (3 colors to

 

 

 

 

indicate variations in input

 

 

 

 

levels), W.100 (white)

 

REFERENCE

Select the standard input level indicated on the level meter.

–20dB, –18dB

 

LEVEL

 

 

 

OVER LEVEL

Select the input level’s lower limit indicated in red for the

–10dB, –8dB, –6dB,

 

 

 

“3COLORS” display.

–4dB, –2dB

 

BAR

Select the brightness of the level meter.

LOW, HIGH

 

BRIGHTNESS

 

 

 

PEAK HOLD

Activates/deactivates the peak hold function of the level

OFF, ON

 

 

 

meter.

 

*1 Memorized for each input.