Menu Configuration—SET-UP MENU

For the operation procedure, see page 7.

Operation guide

Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Settings of “sub menu POSI.”

The setting values and features are as follows.

LOWER1: Displays the current setting and adjustment bar at the lower part of the screen.

UPPER1: Displays the current setting and adjustment bar at the upper part of the screen.

LOWER2: Displays the current setting at the lower part of the screen.

UPPER2: Displays the current setting at the upper part of the screen.

• The adjustment bar is not displayed for some items.

Settings of “SD4:3 LARGE”

The setting values and features are as follows.

OFF: Fit the vertical picture size into the pixel numbers of the monitor display.

ON: Fit the vertical picture size into that of the monitor display.

FUNCTION SETTING

Settings for the sub menu display, color system, color of the tally lamp, picture size, intensity of the button lamps and the PHASE adjustment.

Item

To do

Setting value

sub menu

Select the contents and displaying position of “sub menu.”

☞ “NOTE”

POSI.

 

 

COLOR

Select the color system.

AUTO, NTSC, PAL

SYSTEM

• If the picture is unstable with “AUTO,” select “NTSC” or “PAL.”

 

TALLY SELECT

Select the color of the tally lamp.

GREEN, RED

SD4:3 LARGE

Change the picture size of 4:3 format signal.

☞ “NOTE”

DIMMER

Select the intensity of the button lamps.

NORMAL, DARK

COMPONENT

Deactivates the function of PHASE adjustment (Picture adjustment knob

ENABLE, DISABLE

PHASE

and “PICTURE SUB ADJ.” in SET-UP MENU) except when an NTSC

 

 

signal comes in (☞ 3 on page 6).

 

PICTURE SUB ADJ.

Adjusts the standard level for the picture adjustment and selects the set-up level for the input video signal.

Item

To do

Setting value

CONTRAST*1

Adjust the standard level for the contrast adjusted with the

–20 – +20

 

CONTRAST knob on the front panel.

 

BRIGHT*1

Adjust the standard level for the brightness adjusted with the

–20 – +20

 

BRIGHT knob on the front panel.

 

CHROMA*1

Adjust the standard level for the chroma adjusted with the CHROMA

–20 – +20

 

knob on the front panel.

 

PHASE*1, *2

Adjust the standard level for the phase adjusted with the PHASE

–20 – +20

 

knob on the front panel.

 

NTSC SETUP

Select the set-up level of the input NTSC signal.

00 (compliant with

 

 

0% set-up signal),

 

 

7.5 (compliant with

 

 

7.5% set-up signal)

COMPO. LEVEL

Select the level of the analog component signal (480i and 576i only).

B75 (compliant

 

 

with BetacamVTR

 

 

7.5% set-up signal),

 

 

B00 (compliant

 

 

with BetacamVTR

 

 

0% set-up signal),

 

 

SMPTE (compliant

 

 

with M2VTR signals)

sub menu

Display the sub menu which enables you to adjust the items in “PICTURE SUB ADJ.” while

 

viewing the actual picture.

 

reset

Restore the default settings for all the items in “PICTURE SUB ADJ.”

 

*1 Memorized for each input.

*2 When “COMPONENT PHASE” is set to “DISABLE” and an NTSC signal is input, PHASE can be adjusted.

17