JVC DT-V20L3GZ, DT-V24G11Z 7 General, 7 LCD panel, 7Input/output terminals, Video, Audio, Model name, DT-V24G11Z, DT-V20L3GZ, Model name, DT-V24G11Z, DT-V20L3GZ, Model name, DT-V24G11Z

Specifications 26

7 General

Model name	DT-V24G11Z		DT-V20L3GZ
Type	Multi format LCD monitor
Screen size	Type 24 wide format		Type 20 wide format
Aspect ratio	16:10
Horizontal/vertical frequency	H: 31.469 kHz – 75.000 kHz
(computer signal)	V: 48 Hz – 65 Hz
	* Some signals within this frequency range may not be displayed (“Out of
	range” is displayed).
Compliant video signal format	☞ “Available signals” on page 10
Format	3G SDI: SMPTE424M/SMPTE425M
	DUAL LINK HD SDI:
	SMPTE372M
	HD SDI: BTA S-004C, SMPTE292M
	SD SDI: ITU-R BT.656: 525/625
	SMPTE259M: 525
	EMBEDDED AUDIO:
	SMPTE299M, SMPTE272M
	CLOSED CAPTION:
	EIA/CEA-608, EIA/CEA-708
Audio output	Internal speaker: 1.0 W + 1.0 W
Operating conditions	Operating temperature: 5°C – 35°C (41°F – 95°F)
	Operating humidity: 20% – 80% (non-condensing)
	(Slightly variable depending on ambient conditions for installation.)
Power requirements	AC 120 V, 50 Hz/60 Hz
Rated current	1.15 A		1.00 A
External dimensions	Width:		Width:
(excluding protruding parts)	564 mm (22 1/4˝)	564 mm (22 1/4˝)	477 mm (18 7/8˝)	477 mm (18 7/8˝)
	Height:		Height:
	448.6 mm (17 3/4˝) 408 mm (16 1/8˝)		394.6 mm (15 5/8˝) 354 mm (14˝)
	Depth:		Depth:
	243 mm (9 5/8˝)	99 mm (4˝)	243 mm (9 5/8˝)	99 mm (4˝)
	(with the stand)	(without the stand)	(with the stand)	(without the stand)
Weight	11.5 kg (25.3 lbs) (with the stand)		10.6 kg (23.3 lbs) (with the stand)
	8.6 kg (18.9 lbs) (without the stand)		7.7 kg (16.9 lbs) (without the stand)
Accessories	AC power cord, Power cord holder x 1, Screw x 2 (for power cord holder)

Notice on transportation

This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.

•For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different from actual products.

•Design and specifications are subject to change without notice.

•All company names and product names mentioned herein are used for identification purposes only, and may be the trademarks or registered trademarks of their respective companies.

7 LCD panel

Model name		DT-V24G11Z		DT-V20L3GZ
Type	24˝ wide, active matrix TFT		20˝ wide, active matrix TFT
Effective screen size	Width:	518.4 mm (20 1/2˝)	Width:	433.4 mm (17 1/8˝)
	Height:	324 mm (12 7/8˝)	Height:	270.9 mm (10 3/4˝)
Number of pixels displayed	1 920 x 1 200		1 680 x 1 050
Number of colors displayed	16.77 million
Viewing angle (TYP.)	178° (Horizontally), 178° (Vertically)		178° (Horizontally), 178° (Vertically)
Brightness (TYP.)	400 cd/m2		470 cd/m2
Contrast ratio (TYP.)	1000:1		700:1

7Input/output terminals

	Model name	DT-V24G11Z		DT-V20L3GZ
	VIDEO (INPUT 1)	Input/output of composite signal:
		2 line, BNC connector x 4,
		1 V(p-p), 75 Ω
	VIDEO (INPUT 2)	* The input (IN) and output (OUT) terminals are bridge-
		connected (auto termination).
	DVI-D (HDCP)	DVI-D signal input (compatible with HDCP):
		DVI-D connector x 1 (compatible with DDC2B)
	COMPO./RGB (G/Y, B/PB/B-Y,	Input/output of analog component signal/analog RGB signal:
	R/PR/R-Y)	1 line, BNC connector x 6
		G/Y: 1 V(p-p), 75 Ω (including sync signal)
Video		B/PB/B-Y, R/PR/R-Y: 0.7 V(p-p), 75 Ω
		* The input (IN) and output (OUT) terminals are bridge-
		connected (auto termination).
	EXT.SYNC (CS)	Input/output of composite sync signal:
		1 line, BNC connector x 2,
		0.3 V(p-p) – 4 V(p-p),
		75 Ω (tri-level sync, negative polarity sync (bi-level), and BB)
		(including no video signal)
		* The input (IN) and output (OUT) terminals are bridge-
		connected (auto termination).
	E. AUDIO HD/SD SDI (IN 1)	Digital signal input (compatible with EMBEDDED AUDIO/DUAL LINK signals):
	E. AUDIO HD/SD SDI (IN 2)	auto detection, 2 line, BNC connector x 2
	E. AUDIO HD/SD SDI	Digital signal output (compatible with EMBEDDED AUDIO signals):
	(SWITCHED OUT)	1 line switched out, BNC connector x 1
Audio	AUDIO ASSIGN (IN 1)	Analog audio signal input:	2 line, RCA connector x 4,
	AUDIO ASSIGN (IN 2)		500 mV (rms), high impedance
	AUDIO ASSIGN	Analog audio signal output:	1 line, RCA connector x 2,
	(MONITOR OUT)		500 mV (rms)
External control	REMOTE (MAKE/TRIGGER)	☞ “Using the MAKE/TRIGGER system” on page 21
	REMOTE (RS-485)	☞ “Using the serial communication” on page 22
	REMOTE (RS-232C)