To adjust the stand height

To change the stand height, detach the stand from the monitor (☞ “To detach the stand” on page 4). Then, change the position of the stand plate according to the stand height you want by choosing the screw holes to use.

<Higher position><Lower position>

Screw holes for higher position

Screw holes for lower position

Stand plate

Stand plate

 

To prevent an accidental fall

Fix the monitor to a wall by using strings.

Fixing the monitor

Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two holes on the upper side) using M4 x 10 mm screws (not provided). Bind the hooks on the rear panel of the monitor to a wall or a pillar using durable string.

VESA mounting holes

Hook and screw (M4 x 10 mm) (not provided)

Hook (not provided)

The illustration of the monitor is of DT-V24G11Z.

5