![](/images/new-backgrounds/1131390/13139063x1.webp)
2.6 MECHANISM ADJUSTMENTS
2.6.1 Assembling slide deck assembly and main deck assembly
|
| C | C |
2 | œ | 3 | 3 |
|
| ||
Œ |
|
|
1
3 D
3 3
A B B
Fig.
Assembling procedure
1.Loosen the screw A.
2.Set the mechanism in the PLAY mode.
(Refer to “2.3.2 Explanation of mechanism mode”.)
3.Press the end face B of the slide deck assembly (reel disk side) and the end face C of the main deck assem- bly (drum assembly side) with uniform force so that the two assemblies are tightly pressed to each other. Further- more, press the part D and tighten the screw A.
Note : Tightening torque for screw A: 0.069 N·m (0.7 kgf·cm)