Preparing the remote control

 

When using the remote

 

control, point the top of the

 

remote control toward the

 

remote sensor as directly as

 

possible. If you operate it

 

from a diagonal position,

 

the operating range (approx.

R6(SUM-3)/AA(15F)

5 m) may be shorter.

 

•Dispose of batteries in the proper manner, according to federal, state, and local regulations.

DO NOT recharge, short, disassemble, heat the battery or dispose of it in a fire.

Canceling the Demonstration

Main Unit

ONLY

2sec.

DEMO OFF

DEMO START

To start the demonstration, select DEMO START.
Changing the Color System and
Scanning Mode

Remote

INFO

ONLY

You can select the video output to match it to the color system of your TV (NTSC or PAL).

•If you connect a progressive TV through the COMPONENT jacks, you can enjoy a high quality picture from the built-in DVD player by selecting progressive scanning mode.

•You can change the setting only while the disc playback is stopped.

1 Enter the color system setting mode.

2sec.

SCAN MODE

VFP

2 Select the color system and scanning mode.

L–BALANCE–R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NTSC

 

 

 

PAL

 

 

 

 

 

 

 

 

 

 

 

PAL PROG

 

NTSC PROG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NTSC / PAL NTSC or PAL Interlaced scanning.

 

 

 

 

 

 

For a conventional PAL or NTSC TV.

NTSC / PAL NTSC or PAL Progressive scanning.

PROG

For a progressive NTSC or PAL TV.

3 Store the setting.

SET

English

6