Listening to the radio (FM/AM (MW/SW))
1Press the BAND button repeatedly to select a band.
You can select FM AUTO, FM (FM mono), MW, and SW. The selected band appears in the display (“FM” appears in the display for both FM AUTO and FM (FM mono) modes).
|
| AUTO STEREO |
BAND | = | PRESET |
| ||
|
|
MHz
2Use the TUNING/SELECT dial to tune to a station.
Turn clockwise for higher frequencies and counterclockwise for lower frequencies. The current frequency appears in the display. When the peak frequency is reached, the progression returns to the lowest band frequencies.
(counterclockwise)(clockwise)
TUNING/SELECT
3Release the TUNING/SELECT dial when the desired frequency has been reached.
The frequency is instantly received.
Notes on FM stereo reception
•Set this unit to FM AUTO to listen to an FM broadcast in stereo. The STEREO indicator lights in the display when an FM stereo broadcast is received.
•When FM stereo reception is intermittent, noisy, or when the signal is weak, pressing the BAND button to select FM (FM mono) may improve overall reception of the signal. If another station is tuned while in FM (FM mono) mode, this unit automatically switches to FM AUTO mode.
To change the MW channel space mode
When this unit is shipped, the channel space mode is set to
If the unit is to be used in North or South America, set it to
When switching to
While pressing PRESET+, press the button to turn the unit on to switch to
PRESET
+
= | kHz |
When switching to
While pressing
PRESET
+
= | kHz |
Improving radio reception
For FM and AM (higher frequency SW) stations, fully extend the telescopic antenna and adjust the direction of the antenna until the station you have tuned can be received clearly.
WORLDSPACE ANTENNA SYSTEM
WORLDSPACE DIGITAL RECEIVER FR - DS100
For AM (MW) and AM (lower frequency SW) stations, the antenna is located within the unit, so it is necessary to rotate the unit itself to obtain optimal reception.
WORLDSPACE ANTENNA SYSTEM
WORLDSPACE DIGITAL RECEIVER FR - DS100
Note:
The
Changing the audio presentation of the broadcast
Use the SOUND button to adjust the quality or presentation of the sound of radio and WS BAND broadcasts. Press the SOUND button repeatedly to select one of the following effects.
BEAT: Enhances bass and drums for more dynamic music presentation.
POP: Enhances the frequencies common in pop music for better clarity in music presentation. CLEAR: Filters the sound to remove unwanted noise from the broadcast. This mode is suitable when listening to the news or other spoken word programming.
FLAT: Broadcast is received without any effect added.
SOUND
11