Preset Tuning |
| AC power resume function |
|
|
|
This function provides instant access to the preset frequencies or broadcasters stored in memory. However, it cannot be performed if you do not have any presets stored in memory. To preset stations, refer to “Presetting WS broadcasters and radio stations” on page 12.
1Select the WS band or a radio band.
WS
BAND
or
2Press PRESET– or PRESET+ to select a stored preset.
When pressing PRESET+, if the maximum preset
number is reached, the order starts over again at PRESET 1. Similarly, when pressing
20. | PRESET |
When using an AC power supply and the power supply is turned off during operation, if the power is turned on again within a period of up to 2 days, the unit is turned on and the last station received is instantly tuned. This function is convenient for making timed recordings of broadcasts using a commercially available audio timer.
Note
The AC power resume function does not work if the power is turned off by pulling the AC power cord out of the back of the unit.
To cancel a preset
1Select the preset to be cancelled.
2Press and hold MEMORY/CANCEL for three seconds or more until the CANCEL indicator lights in the display and the PRESET indicators blinks.
MEMORY / CANCEL
CANCEL PRESET
=
3Use
If neither button is pressed for 5 seconds, the CANCEL indicator disappears from the display
and the mode is exited.
PRESET
4PRESS MEMORY/CANCEL again.
“CANCEL” appears in the display. The preset is cancelled, and the preset number is skipped during preset tuning.
MEMORY / CANCEL
= | PRESET |
|
13