JVC FS-8000 Programming Playing Order of the Tracks, Random Play, Repeating Tracks, Search Play

Search Play ————————————

Holding down the 4 or ¢ button on the Unit or the Remote Con- trol, during playback, will fast forward/backwards the CD so you can quickly find a particular passage in the track you are listening to.

Programming the

Playing Order of the Tracks

You can program the playing order of the tracks using the Remote Control.

■You can program up to 20 tracks in any desired order.

■You can only make a program when the CD Player is stopped.

■1. Insert a CD.

■2. Press the CD 38 button.

■3. Press the e button to stop the CD. ■4. Press the PROGRAM button.

The System enters the programming mode and the “PRGM” in- dicator lights up.

PROGRAM

■5. Press the UP, DOWN, >, or < button to select the track to program.

UP button: Increases the track number by 1.

DOWN button: Decreases the track number by 1.

>button: Increases the the track number by ten. < button: Decreases the track number by ten.

• Example: for track 2, press the UP button twice. For track 12, press the > button, then press the UP button twice (or simply press the UP button 12 times).

■6. Press the SET button.

Total playback time of the programmed tracks.

■7. Repeat steps 5 and 6 to select the other tracks for the program.

You can see the total playback time of programmed tracks on the display.

■8. Press the CD 38 button.

The System plays the tracks in the order you have programmed them.

■You can skip to a particular program track by pressing the 4 or ¢ button during Program Play.

To cancel the programming before playing, press the CAN-

CEL button in above step 4, 5 or 6.

To confirm the programmed tracks, press the PROGRAM	English
button; the tracks making up the program will successively be dis-
played in the programmed order.

Track number Programme order number

To stop playing, press the e button once.

To delete all the tracks in a program, press the e button (or the CANCEL button on the Remote Control) while the CD Player is stopped. The “PRGM” indicator goes out and the program is de- leted. Normal Play is resumed.

The program will also be deleted when you press the 0 button to open the CD holder.

Note: If the total playback time of the programmed tracks exceeds 99 minutes 59 seconds, the total playback time will go out on the display.

Random Play

The tracks will play in no special order when you use this mode.

Press the RANDOM button on the Remote Control.

Playback automatically starts and the “RADM” indicator lights up on the display.

To skip a track during playback, press the ¢ button to jump to the next track in the random sequence. Press the 4 button to jump back to the start of a track being played.

To cancel random play, press the RANDOM button again. The “RADM” indicator goes out and Normal Play is resumed.

Repeating Tracks

You can set the program or individual track playing to repeat as many times as you like.

Press the REPEAT button on the Remote Control.

The Repeat indicator changes with each press of the button, as shown below.

= ALL =blank display = (back to the beginning)

:Repeats one track.

In Random Play mode, this indicator is skipped.

ALL : In Normal Play mode, repeats all the tracks.

In Program Play mode, repeats all the tracks in the program.

In Random Play mode, repeats all the tracks in ran- dom order.

To exit Repeat mode, press the REPEAT button until the Repeat indicator on the display goes out

12