Input Signal Selection
Select the Input Signal
INPUT
Press the INPUT button to select the input signal to be played back from the equipment which has been connected to the Plasma Display.
Input signals will change as follows:
– +
INPUT1 INPUT2 | INPUT3 | PC IN |
INPUT MENU |
| VOL + ENTER |
| ||
|
|
|
|
|
|
INPUT
SURROUND
VOL
NR
Notes:
(1)Input terminal will not be selected if the Video Input Card is not installed into the SLOT.
(2)Select to match the signals from the source connected to the component / RGB input terminals. (see page 33)
(3)In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
Selecting the On-Screen Menu Language
SET UP
press to display the SET UP menu.
INPUT
SURROUND
VOL
press to select OSD LANGUAGE.
press to select your preferred language.
NR
PICTURE | SOUND | SET UP |
Selectable languages
ENGLISH(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
.......(Chinese)
SET UP | 1/2 |
| RGB |
INPUT LABEL | RGB1 |
SIGNAL |
|
SCREENSAVER | |
POWER SAVE | OFF |
STANDBY SAVE | ON |
POWER MANAGEMENT | OFF |
OSD LANGUAGE | ENGLISH (US) |
18