JVC GD V502U, GD-V422U manual AC cord connection, Optional Video Input Card insert Slots covered

Connections

When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation.

(Example: GD-V422PCE)

Speakers (Optional accessories)

SPEAKERS

Terminals (L)

1
2	1
	2

SPEAKERS	AC cord connection
Terminals (R)
	(see page 12)
	– AC cord fixing

Note: Connect the power cord before combining with accessories such as the Stand Unit. When combining with accessories such as the Stand Unit, be very careful not to pinch the power cord.

1. Open the clamper.	2. Insert the AC cord and
	close the clamper
	securely.

3.Slide up the clamper and fix the AC cord plug securely.

When loosen the clamper:

Clamper AC cord

Note: The power plug in the illustration may not be the type fitted to your set.

– Cable fixing bands Secure any excess cables with bands as required.

Pass the attached cable fixing band through the clip as shown in the figure.

To secure cables connected to Terminals, wrap the cable fixing band around them then pass the pointed end through the locking block, as shown in the figure.

While ensuring there is sufficient slack in cables to minimize stress (especially in the power cord), firmly bind all cables with the supplied fixing band.

1

2

To tighten: To loosen:

Push the catch

Pull

Pull

Optional Video Input Card insert Slots (covered)

AUDIO

PC IN

SERIAL

SLOT1SLOT2

Note:

Insert the optional Video Input Cards before combining the Plasma Display with the Stand Unit.

SLOT3

From EXTERNAL monitor terminal on Computer (see page 8)

From SERIAL terminal on Computer

7