![SET UP for Input Signals](/images/new-backgrounds/122907/12290765x1.webp)
SET UP for Input Signals
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT / RGB input terminals.
Y, PB, PR signals “COMPONENT”
R, G, B, HD, VD signals “RGB”
|
|
| INPUT | |
| SURROUND |
|
| |
|
|
| VOL |
|
N |
|
|
| R |
PICTURE | SOUND | SET UP | ||
MULTI |
|
|
| ZOOM |
PIP | SWAP | SELECT | MOVE |
1
2
SET UP
Press to display the SET UP menu screen.
Press to select the “COMPONENT / RGB IN SELECT”.
Press to select the desired mode.
SET UP | 1/2 |
| RGB |
INPUT LABEL | RGB1 |
SIGNAL |
|
SCREENSAVER | |
POWER SAVE | OFF |
STANDBY SAVE | ON |
POWER MANAGEMENT | OFF |
OSD LANGUAGE | ENGLISH (US) |
COMPONENT RGB
R
Press to exit from adjust mode.
Note:
Selection may not be possible, depending on which optional board is installed.
3D Y / C FILTER – For NTSC Video images
Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.)
| SET UP |
| 1/2 |
Press to select the “3D Y / C FILTER (NTSC)”. | RGB | ||
|
|
| |
| INPUT LABEL |
| RGB1 |
Press to set ON / OFF. |
| SIGNAL |
|
| SCREENSAVER |
| |
| POWER SAVE |
| OFF |
| STANDBY SAVE |
| ON |
| POWER MANAGEMENT | OFF | |
| OSD LANGUAGE | ENGLISH (US) | |
R | Press | (ACTION) button |
Press to exit from adjust mode.
SIGNAL | [ VIDEO ] |
3D Y/C FILTER (NTSC) | ON |
COLOR SYSTEM | AUTO |
3:2 PULLDOWN | OFF |
ASPECT AUTO (4:3) | NORMAL |
Note:
When ON, this setting only affects NTSC input signals.
33