Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)
•Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
1 Select the FM band (FM1 – 3) you want to store FM stations into.
Each time you press the button, the band changes as follows:
| FM 1 |
| FM 2 |
| FM 3 |
| A M |
|
| (F1) |
| (F2) |
| (F3) | |||
|
|
|
|
|
|
|
|
|
2 Press and hold both buttons for more than 2 seconds.
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually.
Ex.: Storing FM station of 88.3 MHz into the preset number 1 of the FM1 band.
1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
Each time you press the button, the band changes as follows:
| FM 1 |
| FM 2 |
| FM 3 |
| A M |
|
| (F1) |
| (F2) |
| (F3) | |||
|
|
|
|
|
|
|
|
|
2 Tune in to a station (in this example, of 88.3 MHz).
To tune in to stations of higher frequencies
ENGLISH
To tune in to stations of lower frequencies
“-
Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2, or FM3). These stations are preset in the number buttons
When automatic preset is over, the station stored in number button 1 will be automatically tuned in.
CONTINUED ON THE NEXT PAGE
11
