MP3 OPERATIONS

ENGLISH

Refer also to “CD OPERATIONS” on pages 20 to 23.

Playing an MP3 disc

1 Open the control panel.

Notes:

When an external component is connected to the AUX input jack on the control panel, be careful of handling a disc.

When a disc is already in the loading slot, pressing CD CD-CH (AUX) turns on the unit and starts playback automatically.

2 Insert an MP3 disc into the loading slot.

The unit turns on, draws the disc and

starts playback

automatically.

3 Close the control panel by hand.

All files will be played repeatedly until you

stop playback.

The display changes to show the following:

CD–in indicator Current source indication*

Total folder

Total file

number

number

MP3 indicator

Ex.: When the disc contains 19 folders and 144 MP3 files

*When “CLOCK” is set to “ON” (see page 34), the current indication will soon change to the clock time.

Notes:

MP3 discs require a longer readout time.

(It differs due to the complexity of the folder/file configuration.)

When playback starts, folder and file names (or ID3 tags) will automatically appears. (See also page 27.)

If you change the source or turn the power off, disc playback stops (without ejecting the disc).

Next time you select the CD player as the source or turn the power on, disc playback starts from where playback has been stopped previously.

26

Page 26
Image 26
JVC GET0125-001A manual MP3 Operations, Playing an MP3 disc, Insert an MP3 disc into the loading slot