46
ENGLISH
What you can do more withDAB

Tracing the same program automatically

(Alternative Reception)

You can keep listening to the same program.
While receiving a DAB service:
When driving in an area where a service
cannot be received, this unit automatically
tunes in to another ensemble or FM RDS
station, broadcasting the same program.
While receiving an FM RDS station:
When driving in an area where a DAB service
is broadcasting the same program as the
FM RDS station is broadcasting, this unit
automatically tunes in to the DAB service.

To use Alternative Reception

When shipped from the factory, Alternative
Reception is activated.
See also Changing the general settings
(PSM) on page 32.
1Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
2Press ¢ or 4 to select DAB AF
(alternative frequency).
3Turn the control dial to select the desired
mode.
AF ON: Traces the program among DAB
services and FM RDS stations
Alternative Reception. The AF
indicator lights up on the display
(see page 13).
AF OFF: Alternative Reception is
deactivated.
4Press SEL (select) to finish the setting.
Note:
When Alternative Reception (for DAB services) is
activated, Network-Tracking Reception (for RDS
stations: see page 13) is also activated automatically.
On the other hand, Network-Tracking Reception
cannot be deactivated without deactivating
Alternative Reception.

To adjust the DAB volume level

You can adjust the volume level of DAB tuner
and store it in memory. By adjusting the volume
level properly to match it to the FM sound level,
you will not need to adjust the volume level each
time you change the source.
When shipped from the factory, DAB volume
level is set at 00.
See also Changing the general settings
(PSM) on page 32.
1Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
2Press ¢ or 4 to select DAB VOL
(volume).
3Turn the control dial to set to the desired
volume.
You can set it from VOL 12 to VOL 12.
4Press SEL (select) to finish the setting.
EN43-46KD-SX998R[E_EX]f.p65 1/10/03, 12:08 PM46