42
ENGLISH
EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect two external components to this
unit.
Connect one to the CD changer jack on the rear
using the Line Input Adapter KS-U57 (not
supplied), and the other to the AUX (auxiliary)
input jack on the control panel.
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. (See “To select the external component to
use—EXT IN” on page 35.)
• If the input level of the external component
connected to the AUX input jack is not high enough,
increase the input level properly. (See “To adjust
the auxiliary input level—AUX ADJ” on page 35.)
1

Select the external component

(LINE IN or AUX IN).

To select “LINE IN” (component
connected to the CD changer jack on the
rear), press CD CD-CH (AUX) repeatedly.
• If “LINE IN”* does not appear on the display,
see page 35 and select the external input
(“LINE IN”).
*Displayed only when one of the following sources is
selected—FM, AM, and CD.
To select “AUX IN” (component connected
to the AUX jack on the control panel),
press and hold CD CD-CH (AUX).
Note on One-Touch Operation:
When you press CD CD-CH (AUX), the power
automatically comes on. You do not have to press
to turn on the power.
2

Turn on the connected component

and start playing the source.

3

Adjust the volume.

4

Adjust the sound characteristics

you want. (See pages 30 and 31.)

Auxiliary input
(AUX)*
Portable MD player, etc.
*Not compatible with
digital signals.

CD LINE IN*

EN42-42KD-SX998R[E_EX]f.p65 1/10/03, 12:07 PM42