ENGLISH
Searching a station manually: Manual search
1 Select the band (FM1 – 3, AM).
Each time you press the button, the band changes as follows:
| FM 1 |
| FM 2 |
| FM 3 |
| A M |
|
| (F1) |
| (F2) |
| (F3) | |||
|
|
|
|
|
|
|
|
|
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
2 Press and hold ¢
or 4
until “MANU” (manual) starts flashing on the display.
When an FM stereo broadcast is hard to receive:
1 Press MODE to enter the functions mode while listening to an FM stereo broadcast.
“MODE” flashes on the upper part of the display.
2 Press MO (monaural), while “MODE” is still flashing on the display, so that the MO indicator lights up on the display.
Each time you press the button, the MO indicator lights up and goes off alternately.
MO (monaural) indicator
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved.
3 Tune in to a station you want while “MANU” (manual) is flashing.
To tune in to stations of higher frequencies
To tune in to stations of lower frequencies
•If you release your finger from the button, the manual mode will automatically turns off after 5 seconds.
•If you hold down the button, the frequency keeps
(87.5 MHz — 108.0 MHz for FM 1 and FM 2), in 30 kHz intervals (65.00 MHz — 74.00 MHz for FM 3) and 9 kHz for
10
