Note: | 3 Select a character. | |
If you change the setting from “TAG | ||
• See the table below for | ||
OFF” to “TAG ON” while playing an | ||
available characters. | ||
MP3 file, the tag display will be | ||
| ||
activated when the next file starts |
| |
playing. |
|
ENGLISH
•TAG OFF: Turns off the ID3 tag display while playing MP3 files. (Only the folder name and file name can be shown.)
Assigning names to the sources
You can assign names to CDs (both in this unit and in the CD changer).
After assigning a name, it will appears on the display when you select the source.
| Sources | Maximum number |
| of characters | |
|
| |
|
|
|
CDs* |
| Up to 32 characters (up to |
40CDs)
*You cannot assign a name to CD Text or an MP3 disc.
1 Select a source you want to assign a name to.
CD
When you select a source, the power
automatically comes on.
2 While pressing DISP (display), press and hold SEL (select) for more than 2 seconds.
Ex.: When you select CD as the source
4 Move the cursor to the next (or previous) character position.
5 Repeat steps 3 and 4 until you finish entering the name.
6 Finish the procedure while the last selected character is flashing.
To erase the entered characters
Insert spaces using the same procedure
described above.
Available characters
A | B | C | D | E | F | G | H | I | J |
|
|
|
|
|
|
|
|
|
|
K | L | M | N | O | P | Q | R | S | T |
|
|
|
|
|
|
|
|
|
|
U | V | W | X | Y | Z | 0 | 1 | 2 | 3 |
4 | 5 | 6 | 7 | 8 | 9 | – | / | < | > |
space
Notes:
•When you try to assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.)
•When the CD changer is connected, you can assign names to CDs in the CD changer. These names can also be shown on the display if you insert the CDs in this unit.
35