JVC GET0126-001A manual Storing DAB services in memory, To restore the FM/AM tuner, English

Models: GET0126-001A

1 56
Download 56 pages 57.4 Kb
Page 44
Image 44
3 Start searching for an ensemble.

ENGLISH

3 Start searching for an ensemble.

Press ¢ To stop searching before an ensemble is to search for ensembles of higher frequency.

Press 4 4 Select a service (either primary or secondary) you want to listen to. to search for ensembles of lower frequency.

When an ensemble is received, searching stops.

To stop searching before an ensemble is

received, press the same button you have pressed for searching.

4 Select a service (either primary or secondary) you want to listen to.

Press 5 (up) to select the next service. (If a primary service has some secondary services, they are selected before the next primary service is selected.)

Press (down) to select the previous service (either primary or secondary).

To change the display information while tuning in to an ensemble

Normally service name is shown on the display. If you want to check the ensemble name or its frequency, press DISP (display).

Each time you press the button, the following information appears for a while on the display.

Service name

Ensemble name

Channel number

Frequency

To tune in to a particular ensemble without searching

Before you start....

Press FM/AM (DAB) briefly if CD, CD changer, or external component is the current source.

1Press and hold FM/AM (DAB) to select DAB tuner as the source.

2Press FM/AM (DAB) repeatedly to select the DAB band (DAB1, DAB2, or DAB3).

3Press and hold ¢ To change the display information while tuning in to an ensemble or 4 Service name for more than one second.

4Press ¢ To tune in to a particular ensemble without searching or 4 To restore the FM/AM tuner repeatedly until the ensemble you want is reached.

If you hold down the button, the frequency keeps changing until you release the button.

5Press 5 (up) or (down) to select a service (either primary or secondary) you want to listen to.

To restore the FM/AM tuner

Press and hold FM/AM (DAB) again.

Storing DAB services in memory

You can preset up to 6 DAB services in each DAB band (DAB1, DAB2, and DAB3) manually.

Before you start....

Press FM/AM (DAB) briefly if CD, CD changer, or external component is the current source.

1 Select the DAB tuner.

Each time you press and hold the button, the DAB tuner and the FM/AM tuner are alternately selected.

DAB Storing DAB services in memoryDAB  FM/AM FM/AM

2 Select the DAB band (DAB1, DAB2, or DAB3) you want.

Each time you press the button, the DAB band

changes as follows:

 DAB 1  DAB 2  DAB 3 DAB 1 Manual background DAB 2 Manual background DAB 3

(D1) (D2) (D3)

44

Page 44
Image 44
JVC GET0126-001A Storing DAB services in memory, To change the display information while tuning in to an ensemble, English