3 Tune in to an ensemble you want.
4 Select a service of the ensemble you want to listen to.
Press 5 (up) to select the next service.
Press ∞ (down) to select the previous service.
5 Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds.
Selected band/preset number and “MEMO”
(memory) appear alternately for a while.
6 Repeat the above procedure to store other DAB services into other preset numbers.
Notes:
•You can only preset primary DAB services. If you store a secondary service, its primary service will be stored instead.
•A previously preset DAB service is erased when a new DAB service is stored in the same preset number.
•Preset DAB services are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the DAB services again.
Tuning in to a preset DAB |
| ||
ENGLISH | |||
service |
| ||
| |||
|
|
| |
You can easily tune in to a preset DAB service. |
| ||
Remember that you must store services first. If |
| ||
you have not stored them yet, “Storing DAB |
| ||
| |||
services in memory” on pages 44 and 45. |
| ||
Before you start.... |
| ||
Press FM/AM (DAB) briefly if CD, CD changer, or |
| ||
external component is the current source. |
| ||
1 Select the DAB tuner.
Each time you press and hold the button, the DAB tuner and the FM/AM tuner are alternately selected.
DAB 
FM/AM
2 Select the DAB band (DAB1, DAB2, or DAB3) you want.
Each time you press the button, the DAB band
| changes as follows: | |
DAB 1 | DAB 2 | DAB 3 |
(D1) | (D2) | (D3) |
3 Select the number (1 – 6) for the preset DAB service (primary) you want.
Note:
If the selected primary service has some secondary services, pressing the same number button repeatedly will tune in to the secondary services.
45
