JVC GET0126-001A manual Radio Operations, Listening to the radio, Select the band FM1 3, AM

RADIO OPERATIONS

ENGLISH

Listening to the radio

You can use either automatic searching or manual searching to tune in to a particular station.

Searching a station automatically: Auto search

1 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as follows:

FM 1	FM 2	FM 3	A M
(F1)	(F2)	(F3)

Selected band appears*.

2 Start searching a station.

To search stations of higher frequencies

To search stations of lower frequencies

When a station is received, searching stops.

To stop searching before a station is received,

press the same button you have pressed for

searching.

Note:

FM1 and FM2: 87.5 MHz – 108.0 MHz FM3: 65.00 MHz – 74.00 MHz

Lights up when receiving an FM stereo broadcast with sufficient signal strength.

*When “CLOCK” is set to “ON” (see page 33), the current indication will soon change to the clock time.

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

9