JVC GET0425-001A Attaching the control panel, How to use the M MODE button, Contents, For safety

How to use the M MODE button

If you press M MODE, the unit goes into functions mode, then the number buttons and 5/∞buttons work as different function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

To use these buttons for their original functions

again after pressing M MODE, wait for 5 seconds without pressing any of these buttons until the functions mode is cleared or press M MODE again.

Detaching the control panel

Attaching the control panel

CONTENTS

		ENGLISH
Control panel	4
Remote controller — RM-RK50	5
Getting started	6
Basic operations	6
Radio operations	7
FM RDS operations	8
Searching for your favorite FM RDS programme ....	8
Disc operations	10
Playing a disc in the unit	10
iPod operations	13
Sound adjustments	14
General settings — PSM	15
External component operations	18
More about this unit	18
Maintenance	22
Troubleshooting	23
Specifications	25

Note: Only for [EX] model users in UK and

European countries

For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.

Caution on volume setting:

Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

For safety...

•Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.

•Stop the car before performing any complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

3