JVC GET0425-001A manual English

ENGLISH

Indications	Item		Setting, [reference page]
	(	: Initial)
SCROLL *2	•	ONCE	:	Scrolls the track information once.
Scroll	•	AUTO	:	Repeats scrolling (at 5-second intervals).
	•	OFF	:	Cancels.
			•	Pressing D DISP for more than one second can scroll the display
				regardless of the setting.
L/O MODE	•	REAR	:	Select if the REAR LINE OUT terminals are used for connecting the
Line output mode				speakers (through an external amplifier).
	•	WOOFER	:	Select if the REAR LINE OUT terminals are used for connecting a
				subwoofer (through an external amplifier).
WOOFER *3	•	LOW	:	Frequencies lower than 90 Hz are sent to the subwoofer.
Subwoofer cutoff	•	MID	:	Frequencies lower than 135 Hz are sent to the subwoofer.
frequency	•	HIGH	:	Frequencies lower than 180 Hz are sent to the subwoofer.
AUX ADJ	A.ADJ 00		:	Adjust the auxiliary input level to avoid the sudden increase of the
Auxiliary input level	– A.ADJ 05			output level when changing the source from external component
adjustment				connected to the AUX input jack on the control panel.
TAG DISP	•	TAG ON	: Shows the Tag information while playing MP3/WMA tracks, [9].
Tag display	•	TAG OFF	:	Cancels.
AMP GAIN	•	LOW PWR	: VOL 00 – VOL 30 (Select this if the maximum power of the speaker
Amplifier gain control				is less than 50 W to prevent damaging the speaker.)
	•	HIGH PWR	: VOL 00 – VOL 50
IF BAND	•	AUTO	:	Increases the tuner selectivity to reduce interference noises
Intermediate frequency				between close stations. (Stereo effect may be lost.)
band	•	WIDE	:	Subject to interference noises from adjacent stations, but sound
				quality will not be degraded and the stereo effect will remain.

*2 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *3 Displayed only when “L/O MODE” is set to “WOOFER.”

14