GENERAL
Power Requirement:

Maintenance

How to clean the connectors

Wipe the connectors with a cotton swab or cloth moistened with alcohol.

Connectors

Moisture condensation

Moisture may condense on the lens inside the unit. Eject the disc and leave the unit turned on for a few hours until the moisture has evaporated.

To keep discs clean

Wipe in a straight line from center of disc to edge. Do not use liquid cleaners, thinners, or benzene.

Specifications

AUDIO AMPLIFIER SECTION

Power Output:

20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N

Signal-to-Noise Ratio:

80 dBA (reference: 1 W into 4 Ω)

Load Impedance:

4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

 

Bass:

±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)

 

Q1.0, Q1.25, Q1.5, Q2.0

Middle:

±12 dB (0.5 kHz, 1.0 kHz, 1.5 kHz,

 

2.5 kHz)

 

 

Q0.75, Q1.0, Q1.25

Treble:

±12 dB (10.0 kHz, 12.5 kHz, 15.0 kHz,

 

17.5 kHz)

 

 

Q (Fixed)

 

Frequency Response: 40 Hz to 20 000 Hz Line-Out Level/Impedance:

2.5V/20 kΩ load (full scale)

Subwoofer-Out Level/Impedance:

2.5V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

Other Terminal:

USB input jack, AUX (auxiliary)

 

 

input jack, Antenna input

TUNER SECTION

 

Frequency Range:

 

FM:

87.5 MHz to 107.9 MHz

 

(with channel interval set to 100 kHz or

 

200 kHz)

 

 

87.5 MHz to 108.0 MHz

 

(with channel interval set to 50 kHz)

AM:

530 kHz to 1 710 kHz

 

(with channel interval set to 10 kHz)

 

531 kHz to 1 602 kHz

 

(with channel interval set to 9 kHz)

[FM Tuner]

Usable Sensitivity: 9.3 dBf (0.8 μV/75 Ω)

50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 40 dB

[AM Tuner]

Sensitivity/Selectivity: 20 μV/40 dB

To play new discs

Remove any rough areas from the inner and outer edges of the disc.

Do not use the following discs:

Single CD—8 cm (3-3/16”) disc

Warped disc

Disc with sticker and sticker residue

Disc with stick-on label

Unusual shape disc

C-thru Disc (semi-transparent disc)

Disc with transparent or semi-transparent parts on its recording area

CD PLAYER SECTION

 

Type:

Compact disc player

Signal Detection System: Non-contact optical pickup

 

(semiconductor laser)

Number of channels:

2 channels (stereo)

Frequency Response:

5 Hz to 20 000 Hz

Dynamic Range:

96 dB

Signal-to-Noise Ratio:

98 dB

Wow and Flutter:

Less than measurable limit

MP3 Decoding Format:

MPEG1/2 Audio Layer 3

 

Max. Bit Rate: 320 kbps

WMA (Windows Media® Audio) Decoding Format:

 

Max. Bit Rate: 320 kbps

USB SECTION

 

 

 

USB Standard:

USB 1.1, USB 2.0

Data Transfer Rate (Full Speed): Max. 12 Mbps

Compatible Device:

Mass storage class

Compatible File System:

FAT 32/16/12

Playable Audio Format:

MP3/WMA

Max. Current:

DC 5 V

 

500 mA

 

Operating Voltage: DC 14.4 V (11 V to 16 V allowance)

Grounding System: Negative ground Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F)

Dimensions (W × H × D): Installation Size (approx.):

182 mm × 52 mm × 160 mm (7-3/16” × 2-1/16” × 6-5/16”)

Panel Size (approx.):

188 mm × 58 mm × 6 mm (7-7/16” × 2-5/16” × 1/4”)

Mass (approx.): 1.3 kg (2.9 lbs) (excluding accessories)

Design and specifications are subject to change without notice.

If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.

Preparation

You need the installation kits which corresponds to your car.

• Mark all the check boxes () to make sure you have follow the instructions and the listed parts.

Check the battery system in your car

12 V DC, NEGATIVE ground

Prepare this before installation

Parts list for installation and connection

 

A Control panel

B Sleeve

C Trim plate

D Power cord

E Handles

F Remote controller / Battery

Troubleshooting

The fuse blows.

] Are the red and black leads connected correctly?

Power cannot be turned on.

] Is the yellow lead connected?

No sound from the speakers.

] Is the speaker output lead short-circuited?

Sound is distorted.

] Is the speaker output lead grounded?

] Are the “–” terminals of L and R speakers grounded in common?

Noise interfere with sounds.

] Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?

This unit becomes hot.

] Is the speaker output lead grounded?

] Are the “–” terminals of L and R speakers grounded in common?

This unit does not work at all.

Having TROUBLE with operation?

Please reset your unit

Still having trouble??

Call 1-800-252-5722 (USA ONLY)

http://www.jvc.com

] Have you reset your unit?

5 – EN

Page 41
Image 41
JVC KD-R35, GET0624-003A, KD-R412 manual Preparation, Check the battery system in your car, Prepare this before installation

GET0624-003A, KD-R35, KD-R411, KD-R311, KD-R312 specifications

JVC has long been known for its commitment to quality audio equipment, and its KD series of car receivers is no exception. The JVC KD-R412, KD-R35, KD-R411, KD-R312, and KD-R311 are models that highlight the brand's focus on delivering robust sound performance coupled with user-friendly features.

The JVC KD-R412 stands out with its impressive playback capabilities. It supports various formats, including CD, CD-R/RW, and USB audio. Users can enjoy the convenience of connecting their smartphones through the front USB port, which also supports high-resolution audio playback. This model also features JVC's powerful MOS-FET amplifier, ensuring that listeners experience dynamic sound with clear highs and deep lows.

The KD-R35 offers a budget-friendly option without compromising on quality. Its 4-channel output, combined with a maximum power of 50 watts, delivers ample power for great sound in any vehicle. The KD-R35 also features Bluetooth connectivity, allowing for hands-free calling and audio streaming. The intuitive interface makes it easy for users to navigate through their favorite playlists while driving.

The KD-R411 is another excellent choice for music lovers. It includes a 3-band equalizer, enabling users to customize their audio to suit their preferences. The model is equipped with a digital clock and has a detachable face for enhanced security. Additionally, it supports dual phone connection, allowing users to easily switch between two devices.

The KD-R312 is recognized for its user-centric features, including a large, easy-to-read display. The model supports both USB and auxiliary input, making it versatile for various audio sources. It also comes with a built-in amplifier that ensures powerful sound output, making it perfect for anyone seeking an upgrade for their car's audio system.

Lastly, the KD-R311 rounds up the series with an emphasis on functionality and simplicity. It presents a clean design, making it ideal for straightforward audio needs. With AM/FM radio, CD playback, and a user-friendly interface, the KD-R311 captures the essence of what makes JVC receivers popular—quality and ease of use.

In summary, the JVC KD series models, including the KD-R412, KD-R35, KD-R411, KD-R312, and KD-R311, offer a range of features satisfying different preferences and budgets. With robust audio performance, user-friendly interfaces, and versatile connectivity options, these receivers make a strong case for an upgrade to any vehicle’s audio experience.