Connecting a Portable Audio Device
This System has LINE IN/OUT jacks to connect a portable audio device.
Connect between the device and the System by using the stereo mini plug cord (not supplied).
IMPORTANT:
It should be noted that it may be unlawful to
Playing back a portable audio device
Portable audio device (Digital Audio Player, etc.)
To audio output
(or headphone out, etc.)
1 | “LINE” appears on the main display. |
|
2Start playing the device connected.
3 |
| Adjust the volume level to the level |
| you want to listen to. |
To Adjust the Audio Input Level
If the sound from the device connected to the LINE IN jack is too loud or too quiet, you can change the audio input level through the LINE IN jack (without changing the volume level).
On the remote Press and hold for more than 2 seconds while “LINE” is selected as a source.
You can select one of three levels alternately.
To Play Back a Portable Audio Device Easily
By using QP Link (Quick Portable Link), you can easily start playing back a portable audio device connected to the LINE IN jack.
On the remote | Press and hold for more than 2 seconds | ||
|
|
| to activate QP Link. |
|
|
| QP Link indicator appears on the display. |
|
|
| |
|
|
| |
|
|
| To cancel this function, press and hold |
|
|
| for more than 2 seconds again. |
When QP Link is activated, connecting a portable device to the LINE IN jack and starting playback performs the following:
•While listening to another source...
Changes the source to “LINE” automatically. (If you change from “LINE” to another source, QP Link will be canceled.)
•While the System is on standby...
Turns on the System and changes the source to “LINE” automatically (except when the Save mode is on).
NOTE
See “Learning More about This System” on page 16.
13
