JVC GNT0065-025A What is DAB system?, Changing the DAB Information, Improving the DAB reception

Models: GNT0065-025A

1 24
Download 24 pages 17.71 Kb
Page 13
Image 13
What is DAB system?

What is DAB system?

DAB (Digital Audio Broadcasting) is one of the digital radio broadcasting systems available today. It can deliver digital quality sound without any annoying interference or signal distortion. Furthermore, it can carry text, pictures and data. In contrast to FM broadcast, where each program is transmitted on its own frequency, DAB combines several programs (called “services”) to form one “ensemble.”“Primary services” (main radio stations) are sometimes accompanied by “secondary services” to broadcast additional programs.

CAUTION:

Electrostatic discharge from your body may cause noise from the speakers and you cannot hear the broadcast. If this happens, turn off the System (on standby), then turn it on again.

Changing the DAB Information

Each time you press the button, the main display changes as follows:

Service Label

Ensemble ID

Clock

Frequency

(Non-DAB signal)

PTY

Preset Channel

NumberDLS

PTY: Program Type (See page11.)

DLS: Dynamic Label Segment (text messages the station sends)

NOTE

If no signals are sent, “NOSIGNAL” (instead of Service Label), “NONE” (instead of PTY) or “NO TEXT” (instead of DLS) appears on the display.

Improving the DAB reception

With the supplied DAB antenna, you may not be able to receive L-Band ensembles depending on your reception condition. You can improve the reception of both L-Band and Band III ensembles by connecting an active antenna (see page 3) and supplying electricity to the antenna.

While the System is on standby (Display

ON)

After connecting an active antenna, press and hold for more than 2 seconds. The active antenna is powered on and “ANT.P ON” appears on the display.

To power off the active antenna, press and hold the button again. Then “ANT.P OFF” appears on the display .

Scanning ensembles

With the ensemble scanning function, the System scans the DAB bands to pick out available ensembles under your receiving condition.

When you change the source to DAB for the first time after plugging in the AC power code, the System automatically performs the scanning.

When you moved your System or adjusted the antenna position, perform the scanning manually.

Press and hold for more than 2 seconds while tuning in to DAB.

When the scanning is complete, the System starts playing the first service of the ensemble found first .

10

Page 13
Image 13
JVC GNT0065-025A manual What is DAB system?, Changing the DAB Information, Improving the DAB reception, Scanning ensembles

FAQ

What is DAB system?

DAB Digital Audio Broadcasting is a digital radio broadcasting system that provides high quality sound with minimal interference and the ability to carry text, pictures, and data.

How to change DAB information?

Press the button to cycle through different display options, such as Service Label, Ensemble ID, Clock, Frequency, Non-DAB signal, PTY, Preset Channel, and DLS.

How to improve DAB reception?

Connect an active antenna and supply electricity to the antenna to improve reception of both L-Band and Band III ensembles.