Connections
Do not connect the AC power cord until all other connections have been made.
NOTES
•Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception.
•If the cords are covered with vinyl, remove the vinyl to expose the tip of the cord by twisting the vinyl.
DAB antenna (supplied) | For better DAB reception |
| Disconnect the supplied DAB antenna, and connect an active |
| antenna. |
| (See “Improving the DAB reception” on page 10.) |
| Active antenna |
Extend the wire so that you can | (not supplied) |
| |
receive your desired ensembles. |
|
FM antenna (supplied)
Extend it so that you can obtain the best reception.
To a wall outlet
Plug the AC power cord only after all connections are complete.
PHONES | SPEAKERS |
|
RIGHT | LEFT | COAXIAL |
| DAB |
|
|
| LOOP |
| ANTENNA | AM EXT |
| IMPEDANCE |
|
| MIN |
|
To connect the speaker cords
Make sure the both speakers are connected correctly and firmly.
When connecting the speaker cords, match the polarity of the speaker terminals: white cord to (+) and white cord with black stripe to
3
