JVC GNT0065-025A Playing Back Discs, To Set a Disc, Basic Disc Operations, Press, On the, remote

Playing Back Discs

This System can play back the following discs—regular CD and CD-R/CD-RW (recorded either in the audio CD or MP3 format).

• When playing back the MP3 track, MP3 indicator appears on the display.

To Set a Disc

1 On the System 2 3 On the System

The disc cover on	Place a disc correctly with its label side up,	The disc cover on
the System opens.	then press down on the portions around	the System closes.
	the disc’s center hole until you hear a click.	• Do not close
	• When removing the disc, take out the disc	forcibly the disc
	by holding it at the edge with pressing the	cover with the
	System’s pivot lightly.	hand.

Basic Disc Operations

			Press
To	On the	On the
	System	remote
			Current track number and elapsed playing time appear on the
Playback the disc			main display.
			• During playback, press again to stop playing for a moment.
			• While playback is stopped, total track number and total playing
Stop playback			time (for MP3 disc, group number and track number) appear on
			the main display.
			Increases the track numbers.
Select a track
			Decreases the track numbers.
Select a group (MP3	—		Increases the group numbers while playback is stopped.
only)
	—		Decreases the group numbers while playback is stopped.
	—		Fast-forwards the track by pressing briefly.
Forward search /			To stop searching, press 6.
Reverse search			Fast-reverses the track by pressing briefly.

—

To stop searching, press 6.

NOTES

•If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is loaded, playback will not start.

•If no disc is inserted, “NO DISC” appears on the main display.

7