JVC GNT0065-025A Troubleshooting, General, Disc Operations, Radio Operations, Timer Operations

Models: GNT0065-025A

1 24
Download 24 pages 17.71 Kb
Page 20
Image 20
Troubleshooting

Troubleshooting

If you are having a problem with your System, check this list for a possible solution before calling for service.

General

Power does not come on.

\Power plug is not inserted securely. Plug in securely.

Adjustments or settings are suddenly canceled before you finish.

\There is a time limit. Repeat the procedure again.

Operations are disabled.

\The built-in microprocessor may malfunction due to external electrical interference. Unplug the AC power cord and then plug it back in.

Unable to operate the System from the remote control.

\The path between the remote control and the remote sensor on the System is blocked.

\The batteries are exhausted.

No sound is heard.

\Speaker connections are incorrect or loose.

\Headphones are connected.

Disc Operations

The disc does not play.

\The disc is placed upside down. Place the disc with the label side up.

\MP3 disc is recorded with the “packet writing (UDF file).” It cannot be played. Check the files you want to play back.

ID3 Tag on an MP3 disc cannot be shown.

\There are two types of ID3 Tag—Version 1 and Version 2. This System can only show ID3 Tag Version 1.

MP3 groups and tracks are not played back as you expect.

\The playing order is determined when the disc was recorded. It depends on the writing application.

The disc sound is discontinuous.

\The disc is scratched or dirty.

The disc tray does not open or close.

\The AC power cord is not plugged in.

Radio Operations

Hard to listen to broadcasts because of noise.

\Antennas connections are incorrect or loose.

\The AM loop antenna is too close to the System.

\The FM antenna is not properly extended and positioned.

Cannot receive an ensemble.

\Your area is not covered by the ensemble.

\The DAB antenna is not properly extended or positioned. Adjust the antenna and try the ensemble scanning again.

\Connect an active antenna (not supplied).

Timer Operations

Daily Timer does not work.

\The System has been turned on when the on-time comes. Timer starts working only when the System is turned off.

17

Page 20
Image 20
JVC GNT0065-025A Troubleshooting, General, Disc Operations, Radio Operations, Timer Operations, Power does not come on

FAQ

Why does the power not come on?

The power plug may not be securely inserted. Try plugging it in securely.

Why is there no sound heard?

Check the speaker connections and make sure headphones are not connected.

How can I fix the disc tray not opening or closing?

Check if the AC power cord is properly plugged in.