EN 27
DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
D.S.C. RECORDING
You can use your camcorder as a Digital Still
Camera for taking snapshots. Still images are
stored in the memory card.
NOTE:
Before continuing, perform the procedures listed
below:
●Power (墌pg. 14)
●Loading a Memory Card (墌pg.19)
1Remove the lens cap.
2Open the LCD monitor fully. (墌pg.20)
3Set the VIDEO/MEMORY Switch to
“MEMORY”.
4Set the Power Switch to “REC” while pressing
down the Lock Button located on the switch.
●To change the Picture Quality, (墌pg.32,35).
5Press SNAPSHOT. The “O” indication
appears while the snapshot is being taken.
●Still images are recorded in the snapshot mode
with no frame.
●To delete unwanted still images, refer to “Deleting
Files” (墌pg.30).
●When you do not want to hear the shutter sound,
set “MELODY” to “OFF”. (墌pg.32, 34)
NOTE:
If shooting is not performed for approx. 5minutes
when the Power Switch is set to “REC” and power
is supplied from the battery pack, the camcorder
shuts off automatically to save power. To perform
shooting again, push back and pull out the
viewfinder again or close and re-open the LCD
monitor.
Approximate Number of Storable Images
●The number increases or decreases depending
on the Picture Quality, etc.
* Provided
Basic Shooting (D.S.C. Snapshot)Lock Button
Power Switch
SNAPSHOT
VIDEO/MEMORY
Image Size/Picture
Quality
SD Memory Card
8MB16MB32MB*64MB
640x 480/FINE 47 95 205 425
640x 480/STANDARD 160 295 625 1285
Image Size/Picture
Quality
MultiMediaCard
8MB 16MB 32MB
640x 480/FINE 57 105 215
640x 480/STANDARD 191 320 645