TROUBLESHOOTING EN 49
LENS CAP
Appears for 5 seconds after power is turned on if the lens cap is attached or when it is dark.
A. DUB ERROR!
Appears if Audio Dubbing is attempted on a blank portion of a tape. ( pg. 45)
A. DUB ERROR!
<CANNOT DUB ON A LP RECORDED TAPE>
<CANNOT DUB ON A 16BIT RECORDING> <CHECK TAPE’S ERASE PROTECTION TAB>
●Appears if Audio Dubbing is attempted on a tape recorded in the LP mode. ( pg. 45)
●Appears if Audio Dubbing is attempted on a tape recorded in
●Appears if A. DUB (D) on the remote control is pressed when the erase protection tab is set to “SAVE”. ( pg. 45)
INSERT ERROR!
<CANNOT EDIT ON A LP RECORDED TAPE>
<CHECK TAPE’S ERASE PROTECTION TAB>
<CANNOT EDIT ON A BLANK PORTION>
●Appears if Insert Editing is attempted on a tape recorded in the LP mode. ( pg. 45)
●Appears if INSERT (I) on the remote control is pressed when the erase protection tab is set to “SAVE”. ( pg. 45)
●Appears if Insert Editing is attempted on a blank portion of a tape. ( pg. 45)
MEMORY IS FULL
Appears when the memory card’s memory is full and shooting is not possible.
HDV
Appears when pictures recorded in the HDV format are detected. The pictures in the HDV format cannot be played back with this camcorder.
?
Appears when playing back a file that is not compatible with DCF or a file with a size that is not compatible with this camcorder.
COPY PROTECTED
●Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.
MEMORY CARD!
Appears if there is no memory card loaded when the SNAPSHOT Button is pressed while the Power Switch is set to “REC” and the VIDEO/ MEMORY Switch is set to “MEMORY”
PLEASE FORMAT
Appears when there is a problem with a memory card and its memory is corrupt, or it has not been initialised. Initialise the memory card.
( pg. 31)
NO IMAGES STORED
Appears if there are no image files stored in the memory card when you attempt memory card playback.
CARD ERROR!
Appears when the camcorder does not recognise the loaded memory card. Remove the memory card once and insert it again. Repeat these procedures until no indication appears. If the indication still appears, the memory card is corrupted.
CHECK CARD’S WRITE PROTECTION SWITCH
Appears when you attempt to shoot digital still images when the write protection tab on the SD Memory Card is set to the “LOCK” position.
REFERENCES
