FEATURES FOR RECORDING
40 EN
Adjust the white balance
manually when shooting
under various types of
lighting.
1Set the Power Switch
to “REC”.
2Set the recording
mode to “M”. (墌pg.16)
3Hold a sheet of plain white paper in front of
the subject. Adjust zoom or position yourself so
that the white paper fills the screen.
4Select FUNCTION Menu. (墌pg.33)
5Select “MWB” in “W.BALANCE” menu.
(墌pg.33), then press and hold SET or until
begins blinking.
●When the setting is completed, stops
blinking.
6Press SET or to engage the setting.
7Press MENU. The Menu Screen closes and
the Manual White Balance indicator is
displayed.
NOTES:
●In step 3, it may be difficult to focus on the white
paper. In such a case, adjust focus manually.
(墌pg.37)
●A subject can be shot under various types of
lighting conditions indoors (natural, fluorescent,
candlelight, etc.). Because the colour temperature
is different depending on the light source, the
subject tint will differ depending on the white
balance settings. Use this function for a more
natural result.
●Once you adjust white balance manually, the
setting is retained even if the power is turned off or
the battery removed.
These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next.
Wipe or Fader works when video recording is
started or stopped.
1Set the VIDEO/MEMORY Switch to “VIDEO”.
2Set the Power Switch to “REC”.
3Set the recording mode to “M” (墌pg.16).
4Set “WIPE/FADER” in FUNCTION Menu.
(墌pg.33)
●The WIPE/FADER menu disappears and the
effect is reserved.
●The selected effect indicator appears.
5Press the Recording Start/Stop Button to
activate the Fade-in/out or Wipe-in/out.
To deactivate the selected effect
Select “OFF” in step 4. The effect indicator
disappears.
NOTE:
You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.

WIPE/FADER

OFF: Disables the function. (Factory-preset)
WHITE : Fade in or out with a white screen.
BLACK : Fade in or out with a black screen.
SLIDE : Wipe in from right to left, or wipe out
from left to right.
SCROLL : The scene wipes in from the
bottom to the top of a black screen, or wipes out
from top to bottom, leaving a black screen.
1Set the Power Switch to “REC”.
2Set the recording mode to “M”. (墌pg.16)
3Set “EFFECT”, “PROGRAM AE” or
“SHUTTER” in FUNCTION Menu. (墌pg.33)
●The EFFECT, PROGRAM AE or SHUTTER menu
disappears and the selected effect is activated.
●The selected effect indicator appears.
To deactivate the selected effect
Select “OFF” in step 3. The effect indicator
disappears.
NOTES:
●Program AE, Effects and Shutter Effects can be
changed during Record-Standby.
●Some modes of Program AE and Shutter Effects
cannot be used during Night-Scope.
●When a subject is too bright or reflective, a vertical
streak may appear (smear phenomenon). Smear
phenomenon tends to occur when “SPORTS” or
mode of “SHUTTER 1/500 and 1/4000” is
selected.
Manual White Balance AdjustmentWipe Or Fader Effects
White paper
Program AE, Effects and Shutter Effects