ADDITIONAL FEATURES FOR D.S.C.

EN 31

3 Press

 

 

 

 

 

 

 

, ,

or to

 

 

 

 

To Reset The Number Of Prints

 

 

 

 

select “DPOF”, and press

 

 

 

 

 

 

 

 

 

 

 

1 Perform steps 1 3 in “To Print All Still

SET. The DPOF Menu

 

 

 

 

 

 

appears.

 

 

 

 

 

 

 

 

 

 

 

 

Images (One Print For Each)”. ( pg. 30)

4 Press

 

 

 

 

 

 

or

to select

 

 

 

2 Press

or

to select “RESET”, and press

“ALL 1”, and press SET or

 

 

 

 

 

 

SET or

. The DPOF screen appears.

. The DPOF screen

 

 

 

 

 

 

3 Press

or

to select “EXECUTE”, and

appears.

 

 

 

 

 

 

5 Press

or

to select

 

 

 

press SET. The normal playback screen

 

 

 

appears.

 

 

 

 

“EXECUTE”, and press

To cancel selection, select “RETURN”.

SET. The normal playback

The number of prints is reset to 0 for all still

screen appears.

images.

 

To cancel selection, select

“RETURN”.

CAUTION:

 

While performing the above, never disconnect

To Print By Selecting Still Images And

power, as this may cause the memory card to be

corrupted.

Number Of Prints

 

 

 

 

1 Perform steps 1 3 in “To Print All Still

F Initialising A Memory Card

Images (One Print For Each)”. ( pg. 30)

You can initialise a memory card any time.

2 Press

or

to select

After initialising, all files and data stored in the

“CURRENT”, and press

memory card, including those which have been

protected, are cleared.

SET or

. The DPOF

1 Set the VIDEO/MEMORY Switch to

screen appears.

 

 

 

 

 

3 Press

or

to select

 

 

 

 

“MEMORY”.

 

 

 

 

 

the desired file.

 

 

 

 

 

2 Set the Power Switch to “PLAY” while

 

 

 

 

 

4 Press

or

to select the number indication

pressing down the Lock Button located on the

(00), and press SET.

switch.

 

 

 

 

 

5 Select the number of

3 Press MENU. The Menu Screen appears.

prints by pressing to

4 Press ,

,

or

increase the number, or

to select “FORMAT”, and

to decrease the number,

 

 

 

 

 

 

 

 

 

 

 

 

press SET. The FORMAT

and press SET.

 

 

 

 

 

 

 

 

 

 

screen appears.

 

 

 

 

Repeat steps 3 through 5

 

 

 

 

5 Press

or

to

 

 

 

for the desired number of

 

 

 

 

 

prints.

 

 

 

 

 

 

select “EXECUTE”, and

The number of prints can be set up to 15.

press SET. The memory

To correct the number of prints, select the image

card is initialised.

 

 

 

 

again and change the number.

When initialisation is finished, “NO IMAGES

6 Press

or

to select

STORED” appears.

To cancel initialisation, select “RETURN”.

“RETURN”, and press

CAUTION:

 

 

 

 

SET. The “SAVE?”

 

 

 

 

appears.

 

 

 

 

 

 

Do not perform any other operation (such as

If you did not change any

 

 

turning off the camcorder) during initialisation.

 

settings in step 3 through

 

 

Also, be sure to use the provided AC Adapter, as

5, the DPOF Menu

the memory card may be corrupted if the battery

reappears.

 

 

 

 

 

becomes exhausted during initialisation. If the

7 Press

or

to select “EXECUTE” to save

memory card becomes corrupted, initialise it.

the setting you have just made, and press SET.

To cancel selection, select “CANCEL”.

Page 31
Image 31
JVC GR-D390EK manual Initialising a Memory Card, To Reset The Number Of Prints, To Print By Selecting Still Images