Playback Using the Remote

Control

Recording & Playback EN 23

Playback Zoom

Magnifies the recorded image up to 23X at any time during video playback and D.S.C. playback.

ZOOM (T/W) SLOW (W) PLAYw(Left) SHIFTEFFECT
PAUSE orr (Up) SLOW (X) e (Right)STOP or t(Down) ON/OFF

1 Press PLAY (3) to start video playback or perform normal playback of images.

2 At the point you want to zoom in, press the Zoom Button (T).

• To zoom out, press the Zoom Button (W).

Slow-Motion Playback

During normal video playback or still playback, press SLOW (W or X) more than approx. 2 seconds.

•After approx. 10 minutes, normal playback resumes.

•To pause Slow-Motion playback, press PAUSE (8).

•To stop Slow-Motion playback, press

PLAY (3).

Notes:

•After SLOW (W or X) is pressed and held, the still image may be displayed for a few seconds, followed by a blue screen for a few seconds. This is not a malfunction.

•During Slow-Motion Playback, there will be disturbances in video and the picture may seem unstable, especially with steady images. This is not a malfunction.

Frame-By-Frame Playback

During normal or still playback, press SLOW

(W or X) repeatedly. Each time SLOW (W or X) is pressed, the frame is played back.

3 You can move the image on the screen around to find a particular portion of the picture. While holding down SHIFT, press @ (Left), #(Right), %(Up) and t (Down).

•To end zoom, press and hold W until

magnification returns to normal. Or, press STOP (7) and then press PLAY (3) during video playback.

•To end zoom during D.S.C. playback, press

PLAY (3).

Notes:

•Zoom can also be used during slow-motion and still playback.

•Due to digital image processing, the quality of the image may suffer.

Playback Special Effects

Allows you to add creative effects to the video playback image.

SEPIA (Z 40).

MONOTONE (Z 40).

CLASSIC (Z 40). STROBE (Z 40).

1To start playback, press PLAY (3).

2Press EFFECT. The PLAYBACK EFFECT Select Menu appears.

3Press EFFECT repeatedly to move the highlight bar to the desired effect.

•The selected function is activated and after 2 seconds the menu disappears.

•To deactivate/reactivate the selected effect, press ON/OFF.

•To change the selected effect, repeat from step 2 above.

ENGLISH