To Print By Selecting Still Images And Number Of Prints
1Perform steps 1 – 4 in “To Print All Still Images (One Print For Each)” (Z 27).
2Select “CURRENT”, press SET. The DPOF screen appears.
3Press £ or ¤ to select the desired file.
4Press ¢ or ¡ to select the number indication (00), and press SET.
5Select the number of prints by pressing ¡ to increase the number, or ¢ to decrease the number, and press SET.
To Reset The Number Of Prints
1Perform steps 1 – 4 in “To Print All Still Images (One Print For Each)” (Z 27).
2Select “RESET”, press SET. The DPOF screen appears.
3Select “EXECUTE”, press SET.
•To cancel selection, select “RETURN”.
•The number of prints is reset to 0 for all still images.
Caution:While performing the above, never disconnect
power, as this may cause the memory card to be corrupted.
Note:
When the image is printed from the printer, a
black bar appears at the bottom of the screen. This is not a malfunction. By recording with “DIS” deactivated (Z 30) this can be avoided.
•Repeat steps 3 through 5 for the desired number of prints.
•The number of prints can be set up to 15.
•To correct the number of prints, select the image again and change the number.
6Select “RETURN”, press SET. The “SAVE?” appears.
•If you did not change any settings in step 3 through 5 , the DPOF Menu reappears.
7Select “EXECUTE”, press SET.
•To cancel selection, select “CANCEL”.
You can initialize a memory card any time. After initializing, all files and data stored in the memory card, including those which have been protected, are cleared.
1Perform steps 1 – 3 in “Normal Playback Of Images” (Z 25).
2Press MENU.
3Select “MEMORY CARD” ( ).
4Select “FORMAT”, press SET. The FORMAT menu appears.
FORMAT
ERASE ALL
EXISTING DATA?
EXECUTE
CANCEL
5Select “EXECUTE”, press SET. The memory card is initialized.
•When initialization is finished, “NO IMAGES STORED” appears.
•To cancel initialization, select “CANCEL”.