26 EN D.S.C. Recording & PlaybackResetting The File Name

By resetting the file name, a new folder will be made. The new files you are going to make will be stored in the new folder. It is convenient to separate the new files from previously made files.

1Perform steps 1 – 3 in “Normal Playback Of Images” (Z 25).

2Press MENU.

3Select “MEMORY CARD” ( ).

4Select “NO.RESET”, press SET. The NO. RESET screen appears.

5Select “EXECUTE”, press SET. The new folder (such as “101JVCGR”) will be made and the file name of the next shot starts from DVC00001.

Note:

If the file name reaches DVC09999, a new folder

(such as “101JVCGR”) will be made and the file name will start again from DVC00001.

Protecting Files

The Protect mode helps prevent the accidental erasure of files.

1Perform steps 1 – 3 in “Normal Playback Of Images” (Z 25).

2Press MENU.

3Select “MEMORY CARD” ( ).

4Select “PROTECT”, press SET. The

PROTECT menu appears.

•Press £ whenever you want to return to the previous menu screen.

To protect the currently displayed file

5Select “CURRENT”, press SET. The PROTECT screen appears.

6Press £ or ¤ to select the desired file.

7Select “EXECUTE”, press SET.

•To cancel protection, select “RETURN”.

•Repeat steps 6 and 7 for all files you want to protect.

PROTECT

PROTECT?

EXECUTE

RETURN

To protect all files stored in the memory card

5Select “PROT.ALL”, press SET. The PROTECT screen appears.

6Select “EXECUTE”, press SET.

• To cancel protection, select “RETURN”.

Note:

If the “x” mark appears, the currently displayed file is protected.

To Remove Protection

Before doing the following, perform steps 1 – 4 in “Protecting Files”.

To remove protection from the currently displayed file

5Select “CURRENT”, press SET. The PROTECT screen appears.

6Press £ or ¤ to select the desired file.

7Select “EXECUTE”, press SET.

•To cancel selection, select “RETURN”.

•Repeat steps 6 and 7 for all files you want to remove protection.

To remove protection from all files stored in the memory card

5Select “CANC.ALL”, press SET. The PROTECT screen appears.

6Select “EXECUTE”, press SET.

• To cancel selection, select “RETURN”.