To dub the image, press SNAPSHOT.
7
Press 6to start playback.
Set “SNAP/SLOW” to “SNAP”. (31)
Set “[T]Z[M] COPY” to “ON” (34).
Set the Power Switch to “PLAY” (13).
2
3
4
5
6 At the point you want to dub, press 6 again to engage Still Playback.
Set the MEMORY/VIDEO Switch to “VIDEO”.
1
Dubbing Still Images
Recorded On A Tape To A
Memory Card
Still images can be dubbed from a tape to a memory card.
Preparation:
• Load a cassette (18).
• Load a memory card (10).
40 EN Features for RecordingNIGHT :

Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed.

During Night-Alive, it may be difficult to bring the camcorder into focus. To prevent this, use of a tripod is recommended.

[ ] = Factory-preset

EFFECT

[OFF]:

Disables the function.

SEPIA :

Recorded scenes have a brownish tint like old photos.

MONOTONE :

Like classic black and white films, your footage is shot in B/W.

CLASSIC* :

Gives recorded scenes a strobe effect.

STROBE* :

Your recording looks like a series of consecutive snapshots.

MIRROR* :

Creates a mirror image on the left half of the screen, juxtaposed to the normal image on the other half.

*Not available for still image recording. [ ] = Factory-preset

SHUTTER

[OFF]:

Disables the function.

1/60 SHUTTER 1/60:

The shutter speed is fixed at 1/60th of a second. Black bands that usually appear when shooting a TV screen become narrower.

1/100 SHUTTER 1/100:

The shutter speed is fixed at 1/100th of a second. The flickering that occurs when shooting under a fluorescent light or mercury- vapour lamp is reduced.

SHUTTER 1/500 / SHUTTER 1/4000*:

(Refer to “PROGRAM AE” - “SPORTS H” mode)

•The “Z” indication appears during dubbing.

Note:

To use Playback Special effects with a video

image you wish to dub, perform up to step 7 using the remote control (Z 23).

*Not available for still image recording. [ ] = Factory-preset