| GETTING STARTED EN 15 | |||
Using AC Power | M (Manual Recording): |
|
| |
Perform step 4 in “Charging The Battery Pack”. | Allows you to set various recording functions |
| ||
|
| |||
NOTE: |
|
| ||
If you want more creative capabilities than Full | ||||
The provided AC Adapter features automatic | Auto Recording, try this mode. |
|
| |
voltage selection in the AC range from 110 V to | OFF: |
|
| |
240 V. |
|
| ||
Allows you to switch off the camcorder. |
|
| ||
About Batteries |
|
| ||
| PLAY: |
|
| ||
|
|
| ||
DANGER! Do not attempt to take the batteries | ● Allows you to play back a recording on the |
| ||
apart, or expose them to flame or excessive | tape. |
|
| |
heat, as it may cause a fire or explosion. | ● Allows you to display a still image stored in |
| ||
WARNING! Do not allow the battery or its | the memory card or to transfer a still image |
| ||
terminals to come in contact with metals, as this | stored in the memory card to a PC. |
|
| |
can result in a short circuit and possibly start a | ● Allows you to set various playback functions | |||
fire. |
|
| ||
| To resume the original function of the |
|
|
| |
| accurate battery power indication | VIDEO/MEMORY Switch Position |
| ||
If the battery power indication differs from the | VIDEO: |
|
| |
actual operating time, fully charge the battery, and |
|
| ||
Allows you to record on a tape or play back a |
| |||
then run it down. However this function may not |
| |||
tape. If “REC SELECT” is set to “ | / | ” | ||
turn back if the battery was used for a long period | ||||
| ||||
of time under extremely high/low temperature |
| |||
the tape and the memory card. |
|
| ||
condition or charged too many times. |
|
| ||
|
|
| ||
Operation Mode | MEMORY: |
|
| |
● Allows you to record in a memory card or |
| |||
To turn on the camcorder, set the Power Switch | access data stored in a memory card. |
| ||
● When the Power Switch is set to “A” or “M”, | ||||
to any operation mode except “OFF” while | the currently selected image size appears. |
| ||
pressing down the Lock Button located on the |
|
|
| |
switch. |
|
| ||
Power Switch | When the Power Switch is set to “A” or “M”, you | |||
| ||||
Lock Button | can also turn on/off the camcorder by opening/ | |||
| closing the LCD monitor or pulling out/pushing in | |||
| the viewfinder. |
|
| |
| INFORMATION: |
|
| |
| The following explanations in this manual |
| ||
| supposes the use of LCD monitor in your |
| ||
POWER/ | operation. If you want to use the viewfinder, |
| ||
CHARGE lamp | close the LCD monitor and pull out the |
|
| |
VIDEO/MEMORY | viewfinder fully. |
|
| |
|
|
| ||
Choose the appropriate operation mode according to your preference using the Power Switch and VIDEO/MEMORY Switch.
Power Switch PositionA (Full Auto Recording):Allows you to record using NO special effects or manual adjustments. Suitable for standard recording.
The “A” indicator appears on the display.