Turn on the camcorder, the VCR and the TV.

NOTES:

●Before starting Blank Search, if the current position is at a blank portion, the camcorder searches in the reverse direction. If the current position is at a recorded portion, the camcorder searches in the forward direction.

●If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.

●A blank portion which is shorter than 5 seconds of tape may not be detected.

●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.

Connections To A TV Or VCR

Open the cover.

To S connector

 

To AV connector

S cable

AV cable

(optional)

(provided)

1 2 3 4

“Y/C”/“CVBS”Cable

Video Out SelectAdapter*

Switch

To TV or VCR

TV

VCR

VIDEO PLAYBACK EN 23

A Black to S-VIDEO IN (Connect when your TV/ VCR has S-VIDEO IN and A/V input connectors. In this case, it is not necessary to connect the yellow video cable.)

B Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)

C Red to AUDIO R IN** D White to AUDIO L IN**

*If your VCR has a SCART connector, use the provided cable adapter.

**Not required for watching still images only.

NOTES:

● Set the video out select switch of the cable

 

adapter as required:

 

Y/C: When connecting to a TV or VCR which

 

accepts Y/C signals and uses an S-Video cable.

 

CVBS: When connecting to a TV or VCR which

 

does not accept Y/C signals and uses an audio/

PLAYBACK&

included in the package for details on its

video cable.

 

● The S-Video cable is optional. Be sure to use

 

the YTU94146A S-Video cable. Consult the

 

JVC Service Center described on the sheet

 

availability. Make sure to connect the end with

a core filter to the camcorder. The core filter

RECORDING

 

reduces interference.

 

1 Make sure all units are turned off.

 

2 Connect the camcorder to a TV or VCR as

VIDEO

shown in the illustration.

 

If using a VCR, go to step 3. If not, go to step 4.

3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

4

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

6 Start playback on the camcorder. ( pg. 22)

To choose whether or not the following displays appear on the connected TV

●Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 37, 42)

Or, press DISPLAY on the remote control to turn on/off the date indication.

●Time code

Set “TIME CODE” to “ON” or “OFF”. ( pg. 37, 42)

●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 37, 42)

CONTINUED ON NEXT PAGE